| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 968 rear spoiler https://forums.tipec.net/viewtopic.php?f=25&t=7914 |
Page 1 of 1 |
| Author: | SteveSAS [ Tue Feb 23, 2010 4:08 pm ] |
| Post subject: | 968 rear spoiler |
Hi, I need to replace one side (up the back window) of my rear spoiler & wanted some advice on parts. Original Porsche item is a massive £200 for a bit of fibre glass, I could understand if it was the complete spoiler but a small side section a bit OTP I think lol. I found a seller on Ebay that sells pattern items that come in primer but won't have all the threads fixed all the way up as original item so will need to be glued at the top. Just wondered if anyone else can say yeah ok or don't waste your £40 on this as it won't fit properly and will ruin the car?? Any knowledge so much appreciated. Thanks Steve |
|
| Author: | t3rra [ Tue Feb 23, 2010 6:46 pm ] |
| Post subject: | Re: 968 rear spoiler |
My advice would b try it, but get both sides and u may need 2 cut and join old one a little at d bottom, but what ever u may need 2 do 2 get it right will reaqure nothing more then time and care. Put up d eBay link. Make sure it's 968 flat sides and not the 944 rubber shape. |
|
| Author: | J.J. [ Tue Feb 23, 2010 7:52 pm ] |
| Post subject: | Re: 968 rear spoiler |
Why do you want to replace one side? Can't you take a photo? I would repair the original if possible. Chances of the pattern parts matching are slim & the chances of them fitting are even less. It's amazing what you can do with stickaflex! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|