| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Scrap water pumps https://forums.tipec.net/viewtopic.php?f=25&t=7299 |
Page 1 of 1 |
| Author: | sulzeruk [ Mon Nov 30, 2009 10:13 am ] |
| Post subject: | Scrap water pumps |
Anyone got any scrap water pumps lying about as I want to see if they are rebuildable. Alasdair |
|
| Author: | nrwilliams [ Mon Nov 30, 2009 12:51 pm ] |
| Post subject: | Re: Scrap water pumps |
For what car? I have a broken 2.5 944 in the drive which I could take the pump off of for you. Cheers Neil |
|
| Author: | GTH911 [ Mon Nov 30, 2009 3:51 pm ] |
| Post subject: | Re: Scrap water pumps |
Just had mine changed, i'll see if he still has it. Only problem is i live in Brussels, folks could bring it back just after xmas? |
|
| Author: | wildbilly [ Mon Nov 30, 2009 4:50 pm ] |
| Post subject: | Re: Scrap water pumps |
I saw a rebuild kit on an American site somewhere,The S2 pump is loads of money. |
|
| Author: | Ezgeezer [ Mon Nov 30, 2009 5:07 pm ] |
| Post subject: | Re: Scrap water pumps |
They come apart quite easily and they would be easy to rebuild, just press off the impellor and then the pulley (or the other way around) then you need a bearing / shaft ass'y and a seal. I have got a friend that works for one of the largest bearing / seal distributers in the UK looking to see if he can get the parts. The bearing may be quite easy and I am waiting for him to get back on the seal. I will post the details when he gets back to me. |
|
| Author: | Ezgeezer [ Tue Mar 09, 2010 4:18 pm ] |
| Post subject: | Re: Scrap water pumps |
Finally the friend got back to me and says that the bearing would be no problem but the seals are a special and he cannot get them. Looks like there's no cheap solution ! |
|
| Author: | Lee 944 [ Tue Mar 09, 2010 7:33 pm ] |
| Post subject: | Re: Scrap water pumps |
Does he work for Beldam or Klinger. If one doesn't do the seal, the other will. Lee. |
|
| Author: | J.J. [ Tue Mar 09, 2010 8:33 pm ] |
| Post subject: | Re: Scrap water pumps |
You can get seals made to order from places that do reconditioned rams for HGVs. Used to do this all the time & they cost pennies. Rebuilt a hydraulic jack once for under a fiver! |
|
| Author: | t3rra [ Wed Mar 10, 2010 9:00 pm ] |
| Post subject: | Re: Scrap water pumps |
Most water pumps are the same, after 85 they sirguest using turbo style when changin. Iv got a water pump that came off my 1988 S. Any good for ya? |
|
| Author: | sulzeruk [ Wed Mar 10, 2010 9:28 pm ] |
| Post subject: | Re: Scrap water pumps |
Yep, will take anything as long as it is not too rotten! Alasdair |
|
| Author: | t3rra [ Thu Mar 11, 2010 6:46 pm ] |
| Post subject: | Re: Scrap water pumps |
No it's not rotten, and prob didn't need changing as the belts/rollers e.c.t look fine. Iv noticed u brake and sell alot of 944, I'm looking 4 a driver side turbo/s2 headlight lid and plastic souround, and under trim, if u want 2 swap 4 ethir? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|