| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| The boot release switch https://forums.tipec.net/viewtopic.php?f=25&t=7135 |
Page 1 of 1 |
| Author: | dirtydirtyharry [ Fri Nov 13, 2009 8:00 pm ] |
| Post subject: | The boot release switch |
Does it tend to work in other peoples 944s? Mine doesnt and I have tried taking the motor apart. When I reconnected it the thing did 'rotate' so the motor itself seems fine. I suppose it is likely to be the switch whihc has failed but is there a way of 'shorting' the connections on the back of the switch to identify if it is indeed the switch to blame? Cheers! |
|
| Author: | ExAudiSi [ Fri Nov 13, 2009 10:33 pm ] |
| Post subject: | Re: The boot release switch |
Pop the switch out, there aren't many terminals on the back of it. If you have a test light or multi meter you should be able to find out if there is power to the switch and coming out of it. |
|
| Author: | dirtydirtyharry [ Sat Nov 14, 2009 10:39 am ] |
| Post subject: | Re: The boot release switch |
ExAudiSi wrote: Pop the switch out, there aren't many terminals on the back of it. If you have a test light or multi meter you should be able to find out if there is power to the switch and coming out of it. Cheers. I need to get myself one of them test light thingys. There are 3 soldered wires on the back. Any idea which is which? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|