Yep just noticed that
just bushings, do i just do both sides trailing arm bushes or the ones on the torsion bar also?Also any thoughts on what types - OE or powerflex? i had heard that squeak alot but superpro dont seem to do rears?
Thanks
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Just failed Belgium MOT - rear suspension joint? https://forums.tipec.net/viewtopic.php?f=25&t=7093 |
Page 1 of 1 |
| Author: | GTH911 [ Thu Nov 12, 2009 10:33 am ] |
| Post subject: | Just failed Belgium MOT - rear suspension joint? |
These Belgium tests are very intensive! they failed the car on rear left and right suspension joints? they tested it by driving it onto a bed that wriggled the wheels then lifted the car from underneath up and down. Any idea what these parts are? i'm hoping to get my mate to fix it in the UK (hes got a full workshop) and want to do a in out in a day so order the parts in advance. Thanks Graham |
|
| Author: | GTH911 [ Thu Nov 12, 2009 11:52 am ] |
| Post subject: | Re: Just failed Belgium MOT - rear suspension joint? |
Just been googling - could it be the ball joints? i'm surprised the PPI done less than 3 months ago didnt pick up on this if it is the problem. Would ball joints under the test described above be the culprit and can i check myself before ordering? |
|
| Author: | Siggy [ Thu Nov 12, 2009 12:40 pm ] |
| Post subject: | Re: Just failed Belgium MOT - rear suspension joint? |
There are no ball joints on the rear suspension |
|
| Author: | GTH911 [ Thu Nov 12, 2009 1:30 pm ] |
| Post subject: | Re: Just failed Belgium MOT - rear suspension joint? |
Yep just noticed that just bushings, do i just do both sides trailing arm bushes or the ones on the torsion bar also?Also any thoughts on what types - OE or powerflex? i had heard that squeak alot but superpro dont seem to do rears? Thanks |
|
| Author: | tr7v8 [ Thu Nov 12, 2009 2:12 pm ] |
| Post subject: | Re: Just failed Belgium MOT - rear suspension joint? |
Could be trailing arm bushes or the beam mounts where they attach to the body. Personally I'd stay with standard ones not polybush although Polybush maybe cheaper. |
|
| Author: | GTH911 [ Thu Nov 12, 2009 2:40 pm ] |
| Post subject: | Re: Just failed Belgium MOT - rear suspension joint? |
would those be the 'support mounts - 94433107' |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|