Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Sunroof release https://forums.tipec.net/viewtopic.php?f=25&t=672 |
Page 1 of 1 |
Author: | Spencer 77 [ Sat Feb 16, 2008 7:42 pm ] |
Post subject: | Sunroof release |
Hi, picked my 944 S2 today and drove 150miles without any problems......... BUT!!!!!! The sunroof release doesn't appear to work to remove the roof..... i got the guy to knock another £200 off for this so hope that will cover it. Can anyone clarify that I'm trying to release it correctly please???? 1. Turn ignition to first position 2. Press open on sunroof switch until it releases....... Nothing happens.... Am i trying to do this correctly or is it broken??? If it it broken is it a easy/cheap fix or is it going to be a pain?? any suggestions? Cheers Spen ![]() |
Author: | PaulPSB [ Sat Feb 16, 2008 8:49 pm ] |
Post subject: | Re: Sunroof release |
If it's been mis-used it may have stripped the teeth on the plastic gears. I was warned about this with mine ![]() |
Author: | hotblack944 [ Sat Feb 16, 2008 8:55 pm ] |
Post subject: | Re: Sunroof release |
Spen, Have a look at these links: Sunroof Operation, Troubleshooting, and Repair Sunroof Component Testing Plastic Gear Replacement Jim. |
Author: | J.J. [ Sat Feb 16, 2008 9:19 pm ] |
Post subject: | Re: Sunroof release |
If thats your only problem your laughing. Not expensive. Just a bit of time! ![]() |
Author: | Spencer 77 [ Sat Feb 16, 2008 11:32 pm ] |
Post subject: | Re: Sunroof release |
Thanks for the links Jim.... really useful. The sun roof does work i.e it goes up and down.... but releasing it so it can be removed isn't working if that makes sense!!!!! I'm going to take a look and see if i can sort. Thanks Again Spen |
Author: | PaulSmith [ Sun Feb 17, 2008 11:19 am ] |
Post subject: | Re: Sunroof release |
The Clarks guides above should have all that you need, but from memory your problem sounds like the sensor in the centre front of the sunroof is kaputt. It needs to sense that the roof is there before it lets the arms retract - if that makes sense???? |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |