Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Running lumpy? https://forums.tipec.net/viewtopic.php?f=25&t=6304 |
Page 1 of 1 |
Author: | Brucey [ Tue Oct 06, 2009 7:50 pm ] |
Post subject: | Running lumpy? |
Hi all, jumped in my 944S about an 90 mins ago to pick up our chinese ![]() ![]() Andy Bruce. |
Author: | AlpineTurbo [ Tue Oct 06, 2009 9:24 pm ] |
Post subject: | Re: Running lumpy? |
Do the DME 3 wire jumper trick as outlined in Clark's guide and see if that improves matters. Also, when was the last time that you changed your spark plugs. They are meant to be changed every 12k with ideally the Bosch items. |
Author: | J.J. [ Wed Oct 07, 2009 5:49 pm ] |
Post subject: | Re: Running lumpy? |
If you can get 12K out of a set of plugs your doing well! 6K's the limit for me & it goes loads better with a new set. Fit NGK myself. |
Author: | tr7v8 [ Wed Oct 07, 2009 6:54 pm ] |
Post subject: | Re: Running lumpy? |
J.J. wrote: If you can get 12K out of a set of plugs your doing well! 6K's the limit for me & it goes loads better with a new set. Fit NGK myself. Mine used to do 12K as a daily driver but now barely do 2-3K now it is a second car. Always NGK as well. |
Author: | Brucey [ Fri Oct 09, 2009 1:21 pm ] |
Post subject: | Re: Running lumpy? |
Thanks for the replies everyone. Just to give you a quick update I went and had a look under the bonnet the next day armed with a can of WD40 and sprayed all around the spark plug caps and dizzie cap whilst it was running and this cleared it slightly but still not 100% so had a closer look and noticed a crack in one of the HT leads, gave that a good spray and hey presto it started running sweet. So now wondering if I replace that lead should I also replace the others as a matter of course? Also do I have to buy Porsche items? only they're £35 each! |
Author: | J.J. [ Mon Oct 12, 2009 9:26 am ] |
Post subject: | Re: Running lumpy? |
Got my leads rotor arm & cap from German French Swedish. with discount for club membership. Ran alot better after fitting. You need locktite on the screw for the rotor arm. Not big money. You can also buy them from porsche shop etc. You should do the lot! ![]() |
Author: | tr7v8 [ Mon Oct 12, 2009 10:05 am ] |
Post subject: | Re: Running lumpy? |
My lead set & rotor arm & dizzy cap were from Bert at Berlyn. Made a huge difference especially when damp. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |