Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Sunroof problems
https://forums.tipec.net/viewtopic.php?f=25&t=5742		 Page 1 of 1
Author:  Richy_S [ Tue Sep 01, 2009 9:00 pm ]
Post subject:  Sunroof problems
Probably a question for Ben after his all Torque write-up.

One arm of the sunroof lifts giving me an open but tilted roof the other is not engaged and just sits at its closed position.

On trying to close neither move at all (no motor noise either) and it has to be manually closed.

Any pointers?

Rich
Author:  tr7v8 [ Tue Sep 01, 2009 9:04 pm ]
Post subject:  Re: Sunroof problems
Sounds like a stripped gear to me & a partially stripped one. That is what mine was doing.
Author:  stepa1007 [ Tue Sep 01, 2009 9:18 pm ]
Post subject:  Re: Sunroof problems
I would agree with Jim. On our 1986 Lux the gears had both striped AND the cable needed feeding back too.

Stephen
Author:  Richy_S [ Tue Sep 01, 2009 9:33 pm ]
Post subject:  Re: Sunroof problems
Thanks guys not use to these sunroofs after 2 turbo S's.

Rich
Author:  phil.a [ Wed Sep 02, 2009 7:39 am ]
Post subject:  Re: Sunroof problems
hi, that happend to mine last week...it was the left one that stripped...and the cable came out...refitted the cable,fitted a new gear, it went up and down a few times..then the right side stopped working..stripped left gear again and cable out..it turned out to be the top micro switch was out of line...the best way i did it was to take the 2 arms out and operate it till i got both micro switches to work as they should..it is also better if there is to of you one at the motor end and one on the switch that way you can see what is going on...all o.k. know :wink:
Author:  Richy_S [ Thu Sep 03, 2009 8:03 am ]
Post subject:  Re: Sunroof problems
phil.a wrote:
hi, that happend to mine last week...it was the left one that stripped...and the cable came out...refitted the cable,fitted a new gear, it went up and down a few times..then the right side stopped working..stripped left gear again and cable out..it turned out to be the top micro switch was out of line...the best way i did it was to take the 2 arms out and operate it till i got both micro switches to work as they should..it is also better if there is to of you one at the motor end and one on the switch that way you can see what is going on...all o.k. know :wink:


Phil

I have the same problem in that the cable has come out. How did you go about setting the cable position.?

Rich
Author:  phil.a [ Thu Sep 03, 2009 8:34 am ]
Post subject:  Re: Sunroof problems
hi all i did was to take the arms out get some one to operate the switch yo will see a got going round at the motor then just feed it in as soon as it catches let go and it will feed itself..but keep the switch down and it should stop auto at the end..press it back the other was keeping the switch down ond it should stop again if it does not yuor micro switches are out...
Author:  ben944 [ Thu Sep 03, 2009 9:20 am ]
Post subject:  Re: Sunroof problems
Hi,

I did say in the article that I can service and repair anaesthetic machines more easily than the sunroof operates!

Ben :bounce:
Author:  tr7v8 [ Thu Sep 03, 2009 10:04 am ]
Post subject:  Re: Sunroof problems
ben944 wrote:
Hi,

I did say in the article that I can service and repair anaesthetic machines more easily than the sunroof operates!

Ben :bounce:

I quite agree! I apprnticed in aircraft electrics & electronics & I couldn't design a more complex sunroof operation system if I tried!
Author:  Richy_S [ Sat Sep 05, 2009 1:03 pm ]
Post subject:  Re: Sunroof problems
**%?><** sunroof is a pain in the ....

If the roof was in, it will lift and drop fine. The problem I have when pushing the raise button with the ignition at pos 1 the cable retracts beyond the home position i.e beyond when the microswitch 11 makes.
Have checked the microswitch position and switching all is OK.

I guess my problem is a relay, but which one? answers on a postcard.

Rich
Author:  Pete G [ Sat Sep 05, 2009 3:11 pm ]
Post subject:  Re: Sunroof problems
Hi Rich,

I had problems with mine last year and replaced the white gears in the roof, if you are about tomorrow drop me a PM, I can come over and have a look.
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/