Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Dyno Day for 911 & Porsche magazine
https://forums.tipec.net/viewtopic.php?f=25&t=5693
Page 1 of 1

Author:  Copperman05 [ Sun Aug 30, 2009 7:23 pm ]
Post subject:  Dyno Day for 911 & Porsche magazine

Hi,

The guys over at PCGB are organising a 944 dyno day and 911 & Porsche magazine want to do an article on it. Its going to be held near Chester on the 12th September.

They are looking for more numbers if any of you guys are interested?

Look here http://www.porscheclubgbforum.com/tm.as ... age=1&key=

Thanks!

Edd

Author:  Copperman05 [ Mon Aug 31, 2009 5:41 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Nobody interested?

Whats the issue, too far north?

Edd

Author:  tr7v8 [ Mon Aug 31, 2009 6:01 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Tis for me,also conflicts with a TIPEC SELNK event as well.

Author:  PaulSmith [ Mon Aug 31, 2009 7:31 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

I believe there is going to be a Southern one later in the Autumn

Author:  J.J. [ Mon Aug 31, 2009 8:02 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Could be but the links dead! Only for porsche club members & this is TIPEC!

Author:  Graham Waller [ Mon Aug 31, 2009 8:10 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

J.J. wrote:
Could be but the links dead! Only for porsche club members & this is TIPEC!

Not just PCGB - you will need to register on the PCGB forum though and log in.

Author:  J.J. [ Mon Aug 31, 2009 8:12 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Then I won't remeber the username/password. Whats it say?????????? :lol:

Author:  Graham Waller [ Mon Aug 31, 2009 8:17 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

There are 5 pages of forum activity, starting with this:
I have just had another e mail from Steve Bennett, editor of 911 & Porsche Mag.

He is still very keen to do an article on 944 rolling road day. He would prefer NA and Turbo models for the day.

I tried to drum up some of us for a "Northern Rollers of Truth" but only managed a handfull. I am happy to drive south to do one of these, but am equally happy to organise something up here if people were able to attend. Anyone organising anything down south?? Or any takers for a northern day again.

These are the details from my original posting below.

On the Wirral AKA " The Leisure Peninsular ", resides a DYNO DYNAMICS Rolling Road. This will also measure AFR.

http://www.dynodemon.co.uk/home.php

I have just spoken to the guy who was also very helpfull.
Tea and Coffee would be laid on, food could be sorted at extra.

6 to 10 cars = £45 plus VAT
10 plus cars = £40 plus VAT

So any thoughts and anymore numbers if it where on a DD Rolling Road???

Cheers

Lee


_____________________________

Lee
1988 944 Turbo S (now slightly tinkered with)
Nautic Metallic

It was originally for PCGB, but it looks like it is being thrown open to make up the numbers

Author:  J.J. [ Tue Sep 01, 2009 5:34 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Thanks Graham! Not big money to check your engine condition! :)

Author:  Copperman05 [ Tue Sep 01, 2009 9:11 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Shall I count you in then JJ? A Lux would be great.. :D

Edd

Author:  Sean Smallman [ Wed Sep 02, 2009 1:28 am ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

I've dropped a note to the RO's for Cheshire/Staffs and the North West to see if they have anyone up for a day out.

Author:  Copperman05 [ Wed Sep 02, 2009 4:50 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Thanks Sean. I'm still hopeful...

Author:  DaveM [ Wed Sep 02, 2009 5:16 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Wouldn't mind a going and it's not to far from me, but have just discovered a bit of a leak so best not until that's sorted.

Author:  J.J. [ Wed Sep 02, 2009 5:34 pm ]
Post subject:  Re: Dyno Day for 911 & Porsche magazine

Must be catching!

Copperman. Already had mine on the dyno recently & due back again after more work. Can't really justify an extra one at the moment. Sorry.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/