| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| bailcast split cv kit https://forums.tipec.net/viewtopic.php?f=25&t=5186 |
Page 1 of 1 |
| Author: | albi [ Fri Jul 24, 2009 4:16 pm ] |
| Post subject: | bailcast split cv kit |
has anyone tried these? arwe they any good? gotta be worth a try for the money (less than a tenner on e-bay) http://www.bailcast.com/en-gb/products/ ... oots/cvs18 |
|
| Author: | Siggy [ Fri Jul 24, 2009 4:17 pm ] |
| Post subject: | Re: bailcast split cv ki |
I have seen them in the past and they are rubbish |
|
| Author: | tr7v8 [ Fri Jul 24, 2009 4:47 pm ] |
| Post subject: | Re: bailcast split cv ki |
Waste of time, they are also designed for front wheel drive cars & are a totally different style to the very strong Porsche ones. Also by the time Porsche ones need replacing then the driveshaft needs stripping & cleaning & fresh grease. I've recently done 2 944s & one had a noisy driveshaft & one CV was knackered, no suprise. Then on Paul's car, they were absolutely silent & again one CV joint was knackered. |
|
| Author: | albi [ Mon Aug 31, 2009 11:36 am ] |
| Post subject: | Re: bailcast split cv kit |
i have given these a try, after taking extra instruction from a guy who has been using them for years. so far so good, been on for 500 miles so far (checked it this morning) and holding up well. the trick to success is not rushing and changing your rubber gloves loads of times (to eliminate any contamination). worth trying for £8 and about an hours work. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|