Porsche Enthusiasts Club Forum

It is currently Wed Jun 25, 2025 3:33 pm
Classic Line Insurance


All times are UTC




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Trackday woes
PostPosted: Tue Jun 09, 2009 6:44 pm 
Offline

Joined: Tue May 20, 2008 4:22 pm
Posts: 15
TIPEC membership: 5278
Hi all. went on first trackday saturday and had brilliant day. However, I now have an intermittant knocking noise from rear passenger wheel area. Doesn't get worse on cornering, but when occuring gets quicker with forward speed. Haben't had a chance to take wheels off yet but quick inspection appears nothing is loose etc.
The driveshaft on this side seems to slide in and out much easier than the driver side, ie more lateral movement. There doesn't seem to be any excessive play in any other plane.
Before I start to a) cry and b) strip the whole area, any suggestions. Could it be a failing wheel bearing? CV joint?
Thanks


Top
 Profile  
Reply with quote  
 Post subject: Re: Trackday woes
PostPosted: Tue Jun 09, 2009 7:31 pm 
Offline

Joined: Mon Nov 05, 2007 6:24 pm
Posts: 3008
Location: Halifax
TIPEC membership: 4636
Thats different! Is the shocker ok on that side. Only 2 bolts to take it off & pump it. Maybe the wheel bouncing with a burst shocker. Once had this on a 3 litre Capri. Halfway round a roundabout at the time. Ended up on the verge :lol: (My uncle was driving & hes worse than me.)
Probably Jim will be along in a bit with the correct diagnosis. :D :lol:

_________________
944 lux, Eco car. Off the road more than it's on!
Audi 2.0 TDI Good but rather boring..........
944 now sold.


Top
 Profile  
Reply with quote  
 Post subject: Re: Trackday woes
PostPosted: Tue Jun 09, 2009 8:26 pm 
Offline
Moderator
Moderator

Joined: Mon Nov 05, 2007 2:22 pm
Posts: 546
Location: Dorset
TIPEC membership: 981
Probably only a bit of rubber picked up from the track day. Hope so anyway.

:)


Top
 Profile  
Reply with quote  
 Post subject: Re: Trackday woes
PostPosted: Tue Jun 09, 2009 9:02 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Nov 04, 2007 7:43 pm
Posts: 12835
Location: Chatham, Kent
TIPEC membership: 4190
Sounds like classic knackered CV joint. Mine clicked & clacked away & had one had grease that looked more like sawdust. Paul's CV joints all had wet grease but one inner had a chip in it & was scrap.
Easy enough to do, new bolts are 1.50ish each (you need 24!) & the joint is around 60 quid. Oh a big pot of Moly grease, although the new joint will come with some.

Could be loose bolts as well, they do come loose occasionally.

Shock absorber wouldn't be speed related & only generally knock when going over bumps.

_________________
Jim

http://tipec.net/region_southeastlondon.php

2018 Mitsubishi Outlander PHEV
2005 Porsche Cayenne S SOLD
2000 Jeep Grand Cherokee SOLD
2010 Mazda MX5 Mk3.5 2.0 Sport Tech SOLD
2000 Porsche Boxster S SOLD
1987 Porsche 944
2019 Abarth 595C


Top
 Profile  
Reply with quote  
 Post subject: Re: Trackday woes
PostPosted: Wed Jun 10, 2009 7:12 am 
Offline

Joined: Tue Sep 30, 2008 12:16 pm
Posts: 40
Location: Dundee
I once heard a strange noise while on track, it was a dull banging noise........then i realised i had forgot to empty the storage bins in the back wheel arches!

Had some old heavy duty rope banging about in there :lol:

Good luck with getting the issue sorted.

_________________
2006 RX-8 PZ
1983 944
1999 1.4S Lupo


Top
 Profile  
Reply with quote  
 Post subject: Re: Trackday woes
PostPosted: Sat Jun 13, 2009 12:43 pm 
Offline

Joined: Tue May 20, 2008 4:22 pm
Posts: 15
TIPEC membership: 5278
Thanks Guys. Got it in the air and no noise on turning the wheel. If you twist the driveshaft as if opening a throttle on a motorbike with moderate force, the drivers side doesn't have movement the passenger side does, so suspect the driveshaft.

Have been quoted £30+VAT for a complete 2ndhand unit from P & H.

Think I'll give it a whirl for 30 quid.

Thanks again


Top
 Profile  
Reply with quote  
 Post subject: Re: Trackday woes
PostPosted: Wed Jun 17, 2009 1:09 pm 
Offline

Joined: Tue Sep 02, 2008 2:03 pm
Posts: 361
Location: Midlands
TIPEC membership: 0
I had a s/h one from PH and it was fine.
Had it on there for about a year before I sold it and had no issues.

_________________
Current: 1998 996 Carrera 2 in Ocean Blue
Previous: 1980 924 lux, 1983 944 Lux, 1990 944 Turbo SE, 1985 944 Lux, 1998 Boxster 2.5


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group