Porsche Enthusiasts Club Forum

the gear stick surround on my car had 4 holes where previous alarms had been fitted and the led holes had been filled with various grommets, so i won a surround on the bay and decided to fit it this afternoon after a mornings hooning. the new surround came with a blanking plate in the far left hole whereas mine had a blank rocker switch ... or so i thought, on removing surround this rocker switch only had 2 wires from the 6 connected and i was only able to find 2 others !!, along with 2 other alarm leds under cubby area, so i taped other 2 wires up and drilled blanking plate and fitted current alarm led to this, my question is what is/was this rocker for ? it has a 928 prefix to the part number

From recollection mine also has an led in place of the far left switch blank (after market). I have another blank because no central locking. I assume that this switch was for the air con that I don't have. Any other ideas folks?

no air con on this car i'm afraid

Aircon switch is beside the heater controls on mine, I've got an aftermarket led in the far left too...