| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 944 heater wants to be a Passat https://forums.tipec.net/viewtopic.php?f=25&t=4284 |
Page 1 of 1 |
| Author: | madrob6 [ Sat May 02, 2009 9:16 pm ] |
| Post subject: | 944 heater wants to be a Passat |
Got my 944 heater blower to work at full speed now, turned out to be a dodgy connection. Only problem is that after doing that I noticed that the air coming out was stupidly hot. turns out that the heater was stuck on as a piece has broken off of the control box and the cable was just flapping about behind the centre console. So since I can't fix it I thought I'd look for one on ebay, no such luck. Looked through the 944 parts catalogue and found it and decided to see if I could find the same part number in the VW catalogue. Started in the obvious place first with the Golf but the number started differently, then moved onto the Audi 80, same part as the Golf, Audi 100 was completly wrong so I thought I'd check the Passat for the hell of it (seeing as I currently own 2 of the things) and it was the right number! Might have to go over to the VW dealer around the corner for a price. I don't suppose anybody else has one of these parts lying around doing nothing do they? |
|
| Author: | tr7v8 [ Sat May 02, 2009 9:31 pm ] |
| Post subject: | Re: 944 heater wants to be a Passat |
Do you mean the clip has broken off, if so they are around a quid from an OPC. |
|
| Author: | madrob6 [ Sat May 02, 2009 9:39 pm ] |
| Post subject: | Re: 944 heater wants to be a Passat |
Sadly not, there seems to be a chunk missing from the back of it where the cable for the heater valve is clipped on. |
|
| Author: | 944 Man [ Sun May 03, 2009 12:58 am ] |
| Post subject: | Re: 944 heater wants to be a Passat |
Many dual VW / Porsche (VW originally, of course) parts used to be cheaper from OPCs! |
|
| Author: | madrob6 [ Sun May 03, 2009 5:27 pm ] |
| Post subject: | Re: 944 heater wants to be a Passat |
In that case I'll try both, local VW dealers give me a discount because of the amount of parts I bought for my old VW and obviously OPC give me a discount as I'm a TIPEC member. |
|
| Author: | jameso [ Sun May 03, 2009 8:28 pm ] |
| Post subject: | Re: 944 heater wants to be a Passat |
The valve can also seize, You can close that manually if not it sits just at the back of the cam tower. |
|
| Author: | madrob6 [ Sun May 03, 2009 10:19 pm ] |
| Post subject: | Re: 944 heater wants to be a Passat |
Managed to close it off using a screwdriver so it's not seized, wasn't easy to move though. |
|
| Author: | jameso [ Sun May 03, 2009 10:46 pm ] |
| Post subject: | Re: 944 heater wants to be a Passat |
It should move quite easily, it may be worth replacing it to save breaking another part. If I remember correctly on my 82 lux the valve was a cheap part. |
|
| Author: | PaulC [ Mon May 04, 2009 7:15 am ] |
| Post subject: | Re: 944 heater wants to be a Passat |
Sorry being stupip what is OPC? |
|
| Author: | hotblack944 [ Mon May 04, 2009 8:04 am ] |
| Post subject: | Re: 944 heater wants to be a Passat |
Official Porsche Centre. Go here: http://www.porsche.com/uk/ and click on "Find a Porsche Centre", bottom left. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|