| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| How to remove the crank bolt S2 https://forums.tipec.net/viewtopic.php?f=25&t=2813 |
Page 1 of 1 |
| Author: | wildbilly [ Mon Mar 23, 2009 5:48 pm ] |
| Post subject: | How to remove the crank bolt S2 |
Folks, How do I lock the bottom end up to undo the crank bolt? Is it remove the starter and place a block of wood in or is there a pin I can insert somewhere? Book dos'nt seem to mention anything and I dont have access to air tools where the car is at the moment  Thanks |
|
| Author: | tr7v8 [ Mon Mar 23, 2009 6:47 pm ] |
| Post subject: | Re: How to remove the crank bolt S2 |
Two ways of doing it, one is to put a knucklebar & socket on the pulley, lay against the ground or a block of wood & get someone to flick the starter on the key. The other way is to use the tool from http://www.arnnworx.com which looks like this. |
|
| Author: | wildbilly [ Mon Mar 23, 2009 8:50 pm ] |
| Post subject: | Re: How to remove the crank bolt S2 |
Once again , Thanks Jim |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|