Porsche Enthusiasts Club Forum
https://forums.tipec.net/

924S Speedo Cable
https://forums.tipec.net/viewtopic.php?f=25&t=2783		 Page 1 of 1
Author:  Eric Finley [ Wed Mar 18, 2009 5:58 pm ]
Post subject:  924S Speedo Cable
Hi Guys

Not looked at the car as yet but haynes manual for 944 does not appear to cover fitting a new speedo cable. Can anyone give tips/advice on fitting before I go about it the wrong way.

My tip is if you need a new cable go to the OPC, they have to order it but I've been quoted £10.67 + vat will be here on Friday. :D
Author:  tr7v8 [ Wed Mar 18, 2009 6:25 pm ]
Post subject:  Re: 924S Speedo Cable
Quite common to find OPC cheaper than indies.
The Speedo cable runs from the NSF hub (as far as I remember) up to the speedo, the speedo end will bayonet into the speedo head, the lower end is held by a circlip into the hub. Be careful when threading the cable,it is quite possible to short out electrical things & also make sure if follows a smooth curved path as otherwise the speedo will jerk like mad.
Author:  Sean Smallman [ Wed Mar 18, 2009 6:31 pm ]
Post subject:  Re: 924S Speedo Cable
Glad you've found one Eric, we don't want you going too fast :wink:
Author:  944 Man [ Wed Mar 18, 2009 7:11 pm ]
Post subject:  Re: 924S Speedo Cable
After routing it; itll be far easier to connect the speedometer head end first.

Simon
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/