| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| steering wheel boss https://forums.tipec.net/viewtopic.php?f=25&t=2606 |
Page 1 of 1 |
| Author: | Foz [ Tue Feb 10, 2009 1:37 pm ] |
| Post subject: | steering wheel boss |
Hi could somebody let me know what aftermarket steering wheel boss will fit a 1988 924s as i cannot find one listed.Would a 944 boss fit, or any ideas. |
|
| Author: | David924S [ Tue Feb 10, 2009 2:34 pm ] |
| Post subject: | Re: steering wheel boss |
I believe the boss from an early 944 will fit and possibly even the later one, my 924S has the same steering wheel as my 944S2. I bought a Momo boss for my 944S2 to fit my Momo wheel and although I haven't tried it on the 924S it looks the same. You can buy a standard 6 bolt hub for the 924/944 pre86 which should include the 924S for £53 inc Vat from Porscheshop, however not sure if this a Momo one or not and the Momo Boss is collapsable and mine only cost £42 inc vat. |
|
| Author: | 944 Man [ Thu Feb 12, 2009 4:34 am ] |
| Post subject: | Re: steering wheel boss |
VW K70, Golf 1&2, all Sciroccos, late Beetle, early Polos, Derbys, Passats; AUDI 80/90, AUDI 100; Porsche 924, 924S, 944.1, 944.2, 911C2/C4 all use the more slender splined shaft. Early Beetle, VW T2, torsion bar 911s and the 928 use the larger diameter splined shaft. Simon |
|
| Author: | Ben944S2Cab [ Sun Feb 15, 2009 1:58 am ] |
| Post subject: | Re: steering wheel boss |
the one on my 924s wasn't the same as my 944s2. the 924s was a vw golf one. |
|
| Author: | Porsche952 [ Mon Feb 16, 2009 1:23 pm ] |
| Post subject: | Re: steering wheel boss |
I just bought one on ebay £29.99 all in, to fit a MOMO wheel, and the best thing is that IT FITS  thank god, it's cast ally, could have been finished off a bit better IMO as i'm an engineer by trade i guess i might be a bit more pickier than most. It's made by Ektor, |
|
| Author: | 944 Man [ Wed Feb 18, 2009 5:28 pm ] |
| Post subject: | Re: steering wheel boss |
Ben944S2Cab wrote: the one on my 924s wasn't the same as my 944s2. the 924s was a vw golf one. I fitted the same Momo boss onto a series one and a series two car. The same wheel was also fitted on my SE and my 968CS. A steering wheel from the earliest 944 will correctly fit the last 968. |
|
| Author: | barks944 [ Sun Feb 22, 2009 12:35 am ] |
| Post subject: | Re: steering wheel boss |
Porsche952 wrote: I just bought one on ebay £29.99 all in, to fit a MOMO wheel, and the best thing is that IT FITS thank god, it's cast ally, could have been finished off a bit better IMO as i'm an engineer by trade i guess i might be a bit more pickier than most. It's made by Ektor, I picked up one of those, I ended sending it back because I thought it was so badly finished. The Allen key they sent with it even rounded. I thought bosses were supposed to give if you smash into it, the ektor one didn't look like it would. |
|
| Author: | 944 Man [ Sun Feb 22, 2009 10:28 pm ] |
| Post subject: | Re: steering wheel boss |
Ektor have a very poor reputation. For a cheap solution Id suggest Mountney: for best Id choose Momo. Simon |
|
| Author: | CaptainSlow [ Wed Feb 25, 2009 11:15 pm ] |
| Post subject: | Re: steering wheel boss |
in regards to the Ektor bosses, they have different reference numbers for pre and post 1984...1475 and 1408. Does this mean that there is a difference between early and later 944s? |
|
| Author: | 944 Man [ Thu Feb 26, 2009 5:41 pm ] |
| Post subject: | Re: steering wheel boss |
I have fitted the same Momo wheel and boss onto a plastic switched 924; a 951 and a 968. |
|
| Author: | Duke [ Fri Mar 06, 2009 6:09 pm ] |
| Post subject: | Re: steering wheel boss |
WARNING If you fit a momo boss for the late 944 onto an early 944/924 (they are the same except for the indicator lug) then the car will go on fire when you turn the wheel!!!! Dont ask how I know  Mike |
|
| Author: | David924S [ Sun Mar 08, 2009 9:29 pm ] |
| Post subject: | Re: steering wheel boss |
I nearly bought the Ektor boss as it was so cheap but as ha been said earlier it looked very cheap and nasty so I went for the genuine Momo boss around £50 inc postage but I think this is the only 6 bolt aftermarket boss which is collapsible, it fit really well with good quality bolts and fittings and it also maintained a similar distance for the wheel from the dash. |
|
| Author: | zcacogp [ Wed Mar 11, 2009 3:43 pm ] |
| Post subject: | Re: steering wheel boss |
Was the Ektor boss from a place in Bournemouth? I bought one (from a place as mentioned above), and it was shockingly badly made. When used, it made the horn sound at some rotational positions ... I sent it back, and got the cost and the postage (and the cost of my postage back to them) back. Had to argue pretty hard mind, but if they choose to sell tat like that they deserve everything they get. I think that early and late 944's had different fittings. Golfs certainly did (it changed some time during the production of the Mk2. Early Mk2 steering wheels won't fit late Mk2 cars.) Oli. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|