Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Rear brake lines from caliper
https://forums.tipec.net/viewtopic.php?f=25&t=25399
Page 1 of 1

Author:  Austin09 [ Wed Jun 04, 2025 9:56 pm ]
Post subject:  Rear brake lines from caliper

I’m going to change my rear calipers and discs. I’ve also got new flexible brake lines so while I’m doing that I might as well change the line from the flexi hose to the caliper.

I’ve not got a vice here so flaring my own line will be difficult so my plan was to either buy some pre bend pipes - couldn’t find any and probably a fortune - or get some pre flared line if I can work out the length with the fittings already on. There’s a company in Germany that makes the lines to length with the fittings on - anyone know the length? I might try work it out with some locking wire over the weekend.

If anyone knows where I can get pre bent ones fairly inexpensive that would save me some faff

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/