| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Early 944 ring gear / clutch problem https://forums.tipec.net/viewtopic.php?f=25&t=25306 |
Page 1 of 1 |
| Author: | Les [ Fri Jul 05, 2024 2:33 pm ] |
| Post subject: | Early 944 ring gear / clutch problem |
Hi all, I'm replacing the original clutch with a new one from frazerpart, in taking off the old one , I made a slight error in that I threw away the old ring gear absent mindedly. I found a replacement but have a problem- Only 6 of the 9 bolts will go through the holes in the ring gear, the centre hole of each group of three is too small! Am I being stupid?? If not is it ok to drill out the holes? I'm guessing this replacement ring gear is the wrong one in some way? Regards Les |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|