Porsche Enthusiasts Club Forum
https://forums.tipec.net/

944 S2 roof
https://forums.tipec.net/viewtopic.php?f=25&t=25013
Page 1 of 1

Author:  neal [ Thu Jun 30, 2022 6:23 pm ]
Post subject:  944 S2 roof

Hi all,
as above, either side of the roof panel is a edging strip running down the door pillar and along the roof. This has a rubber seal inbetween roof and edging strip.
Is the rubber strip available and if so where please and also how does the edging strip come off ?

Thanks in advance Neal

Author:  Waylander [ Thu Jun 30, 2022 9:03 pm ]
Post subject:  Re: 944 S2 roof

The strip is held on with spring clips you need a thin plastic bladed tool like a paint scrapper, push the clips inwards towards the centre of the strip and they pop off

The rubbers are available from Porsche and are a fiddle to fit, you need to take note of the shape and fitting

Buy a couple of new clips as well, I can guarantee you will break 1 or 2

Author:  hotblack944 [ Fri Jul 01, 2022 6:31 pm ]
Post subject:  Re: 944 S2 roof

You might find this helpful:

http://forums.tipec.net/viewtopic.php?f=25&t=18953

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/