Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
1986 944 TURBO - needs a bit more work now.. https://forums.tipec.net/viewtopic.php?f=25&t=24991 |
Page 1 of 1 |
Author: | hesketh [ Sat May 14, 2022 2:50 pm ] | |||
Post subject: | 1986 944 TURBO - needs a bit more work now.. | |||
hi all, i have a 1986 944T which has been very well looked after by me and the previous owners. i recently had an engine rebuild with uprated parts, dpw, ebc, s/s 3inch exhaust and more done it by Chris @ Loe Bank. unfortunately it was involved in an accident a few weeks back. and now i would like to get it fixed up and back on the road. i know i need the following so far ; 1. Bonnet 2. Passanger front wing 3. Impact bar brackets 4. Turbo air guide 5. Bumper & batwing 6. Both headlights & motor bar 7. Air box and snorkel can someone please tell me from the pictures what other parts i need to get it fixed up. the chassis will need to be pulled on a jig ever so slightly. the engine starts and idles fine but will be getting all the mechanics looked at by Chris once bodywork is sorted. many thanks in advance HM
|
Author: | scam75 [ Mon May 16, 2022 12:01 pm ] |
Post subject: | Re: 1986 944 TURBO - needs a bit more work now.. |
Ouch! That looks a proper big impact! I dread to think what will be needed to put that right. Good luck. |
Author: | Wh1t3Kn1ght [ Fri Jun 03, 2022 8:35 pm ] |
Post subject: | Re: 1986 944 TURBO - needs a bit more work now.. |
You might be better off looking for a 944 body shell or one that has had a rear impact. Might be easier to find a good shell and swap everything over.... Have you tried Douglas Valley breakers? They break 944s regularly and might have a rolling shell... |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |