Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Alternator Charging Harness https://forums.tipec.net/viewtopic.php?f=25&t=24797 |
Page 1 of 3 |
Author: | Waylander [ Mon Jun 21, 2021 4:32 pm ] |
Post subject: | Alternator Charging Harness |
Hi All, having a poke round the engine bay just eyeball inspection I noticed..... ![]() ![]() the nice big red/black is the solenoid actuator wire, the blue is the alternator exciter wire, now up the top here no real drama, down by the starter where the insulation is also failing this cable runs with the main battery cable, if these two get together for a brew, and the car is in gear, it will be off down the road on its own, without a key and probably locked too, if not in gear it will run the starter till it catches fire or the battery goes flat, this harness for the 968 is now NLA, the only solution is to make one.... In progress, ![]() ![]() ![]() ![]() |
Author: | scam75 [ Tue Jun 22, 2021 10:40 am ] |
Post subject: | Re: Alternator Charging Harness |
Good spot Martin and looks a great solution. |
Author: | Waylander [ Tue Jun 22, 2021 6:44 pm ] |
Post subject: | Re: Alternator Charging Harness |
Nearly finished, just waiting for some terminals |
Author: | Waylander [ Mon Jun 28, 2021 9:04 am ] |
Post subject: | Re: Alternator Charging Harness |
first prototype made, taken me ages as I managed to screw my back up some how, New plugs on the way from the USA, Main cable uprated to 120amps, solenoid cable uprated to 33amps, all wiring temp safe to 120 Degrees C, braid cover up to 150 Degrees C, for a mates Turbo I have got some 500 Degree coverings ![]() ![]() ![]() |
Author: | scam75 [ Mon Jun 28, 2021 9:18 am ] |
Post subject: | Re: Alternator Charging Harness |
Tremendous work! Hope your back is better soon. |
Author: | Waylander [ Mon Jun 28, 2021 9:48 am ] |
Post subject: | Re: Alternator Charging Harness |
And this is what happens when the insulation finally gives up, and the harness shorts out........ ![]() ![]() ![]() ![]() |
Author: | scam75 [ Tue Jun 29, 2021 9:01 am ] |
Post subject: | Re: Alternator Charging Harness |
Ouch ![]() |
Author: | scam75 [ Tue Jun 29, 2021 9:01 am ] |
Post subject: | Re: Alternator Charging Harness |
Ouch ![]() |
Author: | Waylander [ Thu Jul 01, 2021 6:12 pm ] |
Post subject: | Re: Alternator Charging Harness |
Must be just the two of us on here now Stuart |
Author: | scam75 [ Tue Jul 06, 2021 11:43 am ] |
Post subject: | Re: Alternator Charging Harness |
It does look that way Martin sadly. |
Author: | sgl1966 [ Tue Jul 06, 2021 2:55 pm ] |
Post subject: | Re: Alternator Charging Harness |
Very similar story at the local garage that have a 60'S Ford F150 in for work , all sat down for tea break when it had several attempts to start its self . Worth checking . Yes it has gone quiet , thought everyone had gone of to facebook groups . |
Author: | pauly [ Wed Jul 07, 2021 12:45 am ] |
Post subject: | Re: Alternator Charging Harness |
I've read about cars starting themselves. Must get out of the habit of leaving mine in gear. Pulled the undertray off yesterday, first time for ages. The steering pump belt tensioner was swinging in the wind. |
Author: | sgl1966 [ Wed Jul 07, 2021 7:49 am ] |
Post subject: | Re: Alternator Charging Harness |
Pauly how are you getting on with those pistons , 10 thou above block deck height ? |
Author: | pauly [ Wed Jul 07, 2021 6:23 pm ] |
Post subject: | Re: Alternator Charging Harness |
Do you mean the pistons I got from Baz, Simon? |
Author: | sgl1966 [ Wed Jul 07, 2021 8:23 pm ] |
Post subject: | Re: Alternator Charging Harness |
Yes , those ones , have you started on your build ? |
Page 1 of 3 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |