that should help everyone
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| General Engine Bay Clips https://forums.tipec.net/viewtopic.php?f=25&t=24521 |
Page 1 of 1 |
| Author: | marks2ply [ Fri Aug 21, 2020 7:17 pm ] |
| Post subject: | General Engine Bay Clips |
Hi All Could anyone tell me the name of the general clips used for clipping wiring and vacuum hoses etc within the engine bay? Secondly is there a set of various sizes that could be readily bought? Any help would be great. Regards Mark |
|
| Author: | Waylander [ Fri Aug 21, 2020 10:44 pm ] |
| Post subject: | Re: General Engine Bay Clips |
I have a picture that’s on my phone with all the clips But I can’t share it on here from my dog n bone Have you got an email address? |
|
| Author: | Waylander [ Sat Aug 22, 2020 7:41 am ] |
| Post subject: | Re: General Engine Bay Clips |
Email sent |
|
| Author: | stratfordshark [ Sat Aug 22, 2020 10:31 am ] |
| Post subject: | Re: General Engine Bay Clips |
Omega clips https://damonengineeringsupplies.com/pr ... ssortment/ |
|
| Author: | Waylander [ Sun Aug 23, 2020 8:38 am ] |
| Post subject: | Re: General Engine Bay Clips |
Did you get it, was it any use? |
|
| Author: | Endoman [ Mon Aug 24, 2020 9:04 am ] |
| Post subject: | Re: General Engine Bay Clips |
Found this on Rennlist :- https://rennlist.com/forums/993-forum/7 ... -ties.html |
|
| Author: | Waylander [ Mon Aug 24, 2020 10:55 am ] |
| Post subject: | Re: General Engine Bay Clips |
that should help everyone |
|
| Author: | Wh1t3Kn1ght [ Mon Aug 24, 2020 8:34 pm ] |
| Post subject: | Re: General Engine Bay Clips |
If you know a cheap supply of 99951302340 then let me know - they are quite expensive from Porsche (£2.20 each) and I need to replace a load in the engine bay that hold the wiring loom around the front bulkhead / behind the engine. |
|
| Author: | Waylander [ Tue Aug 25, 2020 3:29 pm ] |
| Post subject: | Re: General Engine Bay Clips |
well still looking but this might be handy at the price https://www.bresco.com/acatalog/Plastic ... tml#SID=22 these possibly https://fastener.averydennison.com/en/h ... -ties.html https://fastener.averydennison.com/cont ... ev%20A.pdf page 31-32 |
|
| Author: | Waylander [ Tue Aug 25, 2020 3:34 pm ] |
| Post subject: | Re: General Engine Bay Clips |
Wh1t3Kn1ght wrote: If you know a cheap supply of 99951302340 then let me know - they are quite expensive from Porsche (£2.20 each) and I need to replace a load in the engine bay that hold the wiring loom around the front bulkhead / behind the engine. think there is 5 or 10 a bag and they were used on every car between 1970 and 2005, |
|
| Author: | Wh1t3Kn1ght [ Tue Aug 25, 2020 7:38 pm ] |
| Post subject: | Re: General Engine Bay Clips |
Waylander wrote: Wh1t3Kn1ght wrote: If you know a cheap supply of 99951302340 then let me know - they are quite expensive from Porsche (£2.20 each) and I need to replace a load in the engine bay that hold the wiring loom around the front bulkhead / behind the engine. think there is 5 or 10 a bag and they were used on every car between 1970 and 2005,  That teaches me to read a bit better - the description in PET2 is "cable ties" not "cable tie" so hopefully it is a bag of 5 or 10 like you say.Will get that added to my ever increasing parts order list... |
|
| Author: | karozza [ Sun Aug 30, 2020 12:04 pm ] |
| Post subject: | Re: General Engine Bay Clips |
Wh1t3Kn1ght wrote: If you know a cheap supply of 99951302340 then let me know - they are quite expensive from Porsche (£2.20 each) and I need to replace a load in the engine bay that hold the wiring loom around the front bulkhead / behind the engine. I think WURTH should have these, or very similar. |
|
| Author: | karozza [ Sun Aug 30, 2020 12:05 pm ] |
| Post subject: | Re: General Engine Bay Clips |
Waylander wrote: that should help everyone Great pic, thanks for sharing. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|