| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 968 turbo https://forums.tipec.net/viewtopic.php?f=25&t=24453 |
Page 1 of 1 |
| Author: | Por968T [ Sun Jun 21, 2020 3:16 pm ] | ||
| Post subject: | 968 turbo | ||
Just thought I'd say hi, have been on here for a long time, but cant remember my password and dont have access to my old email to reset it.. Had a 1988 944 turbo, underside was very rotten, so reshelled it into a 968 currently running 405hp 448ftlbs, new injectors, wasted spark, cam and adjustable cam gear to come, should be around 430whp when done
|
|||
| Author: | Waylander [ Sun Jun 21, 2020 8:17 pm ] |
| Post subject: | Re: 968 turbo |
Nice colour, |
|
| Author: | pauly [ Mon Jun 22, 2020 11:01 am ] |
| Post subject: | Re: 968 turbo |
One of my favourite colours. What spec is the engine running now? |
|
| Author: | Por968T [ Mon Jun 22, 2020 9:00 pm ] |
| Post subject: | Re: 968 turbo |
pauly wrote: One of my favourite colours. What spec is the engine running now? stock 2.5 stock head arp head studs Cometic 040 head gasket true 3" turbo back exhaust Bosch Motorsport 960cc injectors Voodoo stage 3 turbo Vems tial MVS 38mm wg just ordered new cam and adjustable cam gear |
|
| Author: | autonoob [ Tue Jun 23, 2020 1:51 am ] |
| Post subject: | Re: 968 turbo |
It looks nice, red will always be on top of my favorite colors. |
|
| Author: | pauly [ Tue Jun 23, 2020 8:09 am ] |
| Post subject: | Re: 968 turbo |
Por968T wrote: pauly wrote: One of my favourite colours. What spec is the engine running now? true 3" turbo back exhaust Bosch Motorsport 960cc injectors Voodoo stage 3 turbo Vems tial MVS 38mm wg just ordered new cam and adjustable cam gear Have you mapped the VEMS on a rolling road? |
|
| Author: | Por968T [ Tue Jun 23, 2020 9:17 am ] |
| Post subject: | Re: 968 turbo |
pauly wrote: Por968T wrote: pauly wrote: One of my favourite colours. What spec is the engine running now? true 3" turbo back exhaust Bosch Motorsport 960cc injectors Voodoo stage 3 turbo Vems tial MVS 38mm wg just ordered new cam and adjustable cam gear Have you mapped the VEMS on a rolling road? Yep, several times now, and again when the cams installed |
|
| Author: | pauly [ Tue Jun 23, 2020 5:33 pm ] |
| Post subject: | Re: 968 turbo |
Did you try VEMS autotune? |
|
| Author: | Por968T [ Tue Jun 23, 2020 7:04 pm ] |
| Post subject: | Re: 968 turbo |
pauly wrote: Did you try VEMS autotune? no |
|
| Author: | pauly [ Tue Jun 23, 2020 7:26 pm ] |
| Post subject: | Re: 968 turbo |
Por968T wrote: pauly wrote: Did you try VEMS autotune? no Why not? |
|
| Author: | Por968T [ Tue Jun 23, 2020 8:46 pm ] |
| Post subject: | Re: 968 turbo |
pauly wrote: Por968T wrote: pauly wrote: Did you try VEMS autotune? no Why not? never used it, I can't imagine it would be as good as a proper tuner with a rolling road? although I am having terrible trouble with the new injectors and deadtime |
|
| Author: | pauly [ Tue Jun 23, 2020 11:21 pm ] |
| Post subject: | Re: 968 turbo |
I think mapping on the road, V the airflow in a dyno room can work. Think I read Peep doesn't map VEMS on dynos. Do you need bigger than the 80's. |
|
| Author: | Por968T [ Sat Jun 27, 2020 5:11 pm ] |
| Post subject: | Re: 968 turbo |
pauly wrote: I think mapping on the road, V the airflow in a dyno room can work. Think I read Peep doesn't map VEMS on dynos. Do you need bigger than the 80's. I had it mapped on the road by Gunni when it was first installed, but has has significant changes since then, was also running on stock head studs and head gasket so kept lifting the head. as for the injectors, they were at 80DC at 400hp so probably needed a bit more headroom, also, the bosch motorsport injectors are far better then the old Siemens Deka 80lb ones |
|
| Author: | Carrera RSR [ Mon Aug 10, 2020 2:02 pm ] |
| Post subject: | Re: 968 turbo |
This thread needs more images of the car and the bay 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|