Found the culprit!
The Brembo disc replacement I bought is not the exact measurements.
Eurocarparts stated these discs for the S2 & they incorrect.
Will have to order another set
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| S2 Front Brembo Calipers offset!? https://forums.tipec.net/viewtopic.php?f=25&t=24239 |
Page 1 of 1 |
| Author: | karozza [ Fri Dec 06, 2019 2:08 pm ] |
| Post subject: | S2 Front Brembo Calipers offset!? |
Changing/servicing front calipers/Discs/pads/spring plates etc & noticed when caliper in place, it is offset to the disc. Meaning the outside pads/pistons have to travel quite a bit more for the pad to touch the disc. Is this normal? |
|
| Author: | karozza [ Fri Dec 06, 2019 3:03 pm ] |
| Post subject: | Re: S2 Front Brembo Calipers offset!? |
Found the culprit! The Brembo disc replacement I bought is not the exact measurements. Eurocarparts stated these discs for the S2 & they incorrect. Will have to order another set
|
|
| Author: | Endoman [ Wed Dec 11, 2019 7:54 pm ] |
| Post subject: | Re: S2 Front Brembo Calipers offset!? |
Not unique they seem to get it wrong quite often. |
|
| Author: | karozza [ Thu Dec 12, 2019 9:26 am ] |
| Post subject: | Re: S2 Front Brembo Calipers offset!? |
Yes, true. Also, if I give them the previous UK Reg number, it doesn't show up as a 3.0. I'm assuming these discs are for a 2.5 or 2.7. But, unfortunately I could have checked the disc measurements shown in the details. Now received the PAGID fronts & are a perfect fit. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|