Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Suspension top mounts
https://forums.tipec.net/viewtopic.php?f=25&t=24182
Page 1 of 1

Author:  Alan.C [ Sun Oct 06, 2019 4:42 pm ]
Post subject:  Suspension top mounts

Hi all
Does anybody know if the front suspension top mounts from a 968 are the same for a 944 S2 ? I need to replace mine on my S2 and a used pair has come up from a 968.
Also where would be a good place to get some new from ?
many thanks

Author:  51rider [ Sun Oct 06, 2019 5:49 pm ]
Post subject:  Re: Suspension top mounts

I believe that the 968 units can be used on an S2. NLA from Porsche so used is your only option as no-one makes a pattern part either.

Author:  Waylander [ Sun Oct 06, 2019 10:21 pm ]
Post subject:  Re: Suspension top mounts

That is true as the S2 and the 968 have top mounts with a 4 degree angle set in them

They are NLA from Porsche and when they were available they were £508 each!

The dealer restoration competition emptied the parts bins for us mere mortals

Author:  Alan.C [ Mon Oct 07, 2019 6:04 am ]
Post subject:  Re: Suspension top mounts

Thanks for the replies
So it looks like a good condition used part is the answer then unless anyone has any other options ?
I have seen adjustable top mounts but would i need to think about replacing the struts as well ?

Alan

Author:  Waylander [ Mon Oct 07, 2019 6:55 am ]
Post subject:  Re: Suspension top mounts

Mine are original at 160k they do tend to last a long time, and if your a engineer the bearings can be replaced

The adjustable ones should fit the standard struts

Author:  scam75 [ Mon Oct 07, 2019 8:39 am ]
Post subject:  Re: Suspension top mounts

Yip, echo what Martin says, my original ones going strong at 157k miles and adjustable ones will not necessitate a strut change.

Stuart

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/