| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Roll cage fitting https://forums.tipec.net/viewtopic.php?f=25&t=24174 |
Page 1 of 1 |
| Author: | gothatway [ Mon Sep 30, 2019 8:05 am ] |
| Post subject: | Roll cage fitting |
My late 85 944 is in the workshop having a roll hoop fabricated. A question has arisen regarding the mounting of the rear vertical section, which they would normally want to mount onto a fabricated box in the outside rear corner of the back footwell. But the handbrake cable runs across this area. Has anyone here encountered this issue ? |
|
| Author: | Prophead [ Mon Sep 30, 2019 5:14 pm ] |
| Post subject: | Re: Roll cage fitting |
The Safety Devices cage mounts on the large box section of sill outside of that. Don't have access to my pc to show a pic sorry. |
|
| Author: | Prophead [ Mon Sep 30, 2019 5:22 pm ] |
| Post subject: | Re: Roll cage fitting |
viewtopic.php?f=25&t=21557&start=45 Page 4 of this post has some photos |
|
| Author: | Carrera RSR [ Tue Oct 01, 2019 11:28 am ] |
| Post subject: | Re: Roll cage fitting |
Here's my SD cage going in. Plates have already been welded in to the shell before the carpet was installed, holes cut in the carpet for the cage to mount to plates. No issue mounting to the box section or the arches (PS Terry Clark welded in the plates which IIRC we spoke of previously)  Seat base from a 968 back in place which serves the 'rear seat retained' situation for sprints and hillclimb production class 
|
|
| Author: | sgl1966 [ Wed Oct 02, 2019 4:01 pm ] |
| Post subject: | Re: Roll cage fitting |
Just to mention I have that same Safety Devices rear cage with harness bar listed on ebay at the moment if your interested . Like the rear seat , is that a club sport rear seat delete ? |
|
| Author: | Carrera RSR [ Wed Oct 02, 2019 7:53 pm ] |
| Post subject: | Re: Roll cage fitting |
sgl1966 wrote: Like the rear seat , is that a club sport rear seat delete ? No, just a stock seat with split back sections. Looks sportier. Weighs at least the same |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|