| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Head Lamp Levelling Control https://forums.tipec.net/viewtopic.php?f=25&t=24165 |
Page 1 of 1 |
| Author: | Picard1701 [ Fri Sep 20, 2019 2:16 pm ] | |||
| Post subject: | Head Lamp Levelling Control | |||
So the Head Lamp Levelling Switch in my 944 was not working when I moved it from 0 to 1 or 2. Checked the little motors to find the wires cut!!! (Photos). Where do they connect to? Just can find where to reconnect! Thank you.
|
||||
| Author: | Waylander [ Fri Sep 20, 2019 4:41 pm ] |
| Post subject: | Re: Head Lamp Levelling Control |
pictures are massive and grainy, they need shrinking before posting, so it looks like the plug is in the little motor in pic 2, hard to see, should connect to the main loom, probably cut due to a short in one of the motors but why not unplug??? the motors are about £100 each, need to find the ends of the wires this is a good free tool for shrinking your pics https://www.bricelam.net/ImageResizer/ |
|
| Author: | Picard1701 [ Fri Sep 20, 2019 4:43 pm ] |
| Post subject: | Re: Head Lamp Levelling Control |
Waylander wrote: pictures are massive and grainy, they need shrinking before posting, so it looks like the plug is in the little motor in pic 2, hard to see, should connect to the main loom, probably cut due to a short in one of the motors but why not unplug??? the motors are about £100 each, need to find the ends of the wires this is a good free tool for shrinking your pics https://www.bricelam.net/ImageResizer/ Thank you. Will use the tool. Many many thanks |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|