Sunroof Seal

Picard1701 · **Posted:** Sat Sep 14, 2019 8:42 am

I am trying to find the seal that goes round the sunroof lid? I can see the seal on the parts diagram that is on the car (e.g.goes round hole and roof lining) but the parts diagram just says "lid" and does not mention the rubber seal round the lid. Is this part obtainable?

hotblack944 · **Posted:** Sat Sep 14, 2019 3:32 pm

Yes, part number 944 564 114 05 (might have been superseded by 06 now?)

Waylander · **Posted:** Sat Sep 14, 2019 5:08 pm

At £110 not cheap

Picard1701 · **Posted:** Mon Sep 16, 2019 9:47 am

Thanks guys.....

That is not cheap!!!

Waylander · **Posted:** Mon Sep 16, 2019 4:30 pm

looks like they have come down a shade

944 564 114 06 £96.86 inc vat

Picard1701 · **Posted:** Mon Sep 16, 2019 9:03 pm

Waylander wrote:

looks like they have come down a shade

944 564 114 06 £96.86 inc vat

Thank you, have stuck on "watch" until ready to head back into that part of the car

Wh1t3Kn1ght · **Posted:** Tue Sep 17, 2019 1:43 pm

Seal extrusions on ebay sell 944 seals, I got a boot seal from them recently and it fitted fine. Unfortunately I'd already paid the Porsche tax and bought my sunroof seals from the dealer. The internal seal is a standard seal type that can be picked up at any good auto store or seal manufacturer.

https://www.ebay.co.uk/itm/222964008783

Also try here - you can match up the seal to the profile pictures and size information -

https://www.sealsdirect.co.uk

Waylander · **Posted:** Tue Sep 17, 2019 6:23 pm

I spent months looking for a replacement not from the Porsche parts bin, no joy

Picard1701 · **Posted:** Tue Sep 17, 2019 7:17 pm

Thanks again guys at least I know th prices and alternatives now. Great advice. Thank you

JasonGibson · **Posted:** Tue Sep 17, 2019 11:16 pm

why are you replacing the seals ?

i was warned not to do mine when i first got the car many years ago.
They said the roof would never fit flush again, I should have listened.

Waylander · **Posted:** Wed Sep 18, 2019 7:15 am

How true that is, never the same again

mikseymono · **Posted:** Wed Sep 18, 2019 7:20 am

funnily enough...I put on OEM seals...and the roof is very tight....have to get it a couple of bangs with the hand to get it flush....18 months on and it is still the same...maybe 1mm or so too wide? But better than too small.......

Waylander · **Posted:** Wed Sep 18, 2019 7:23 am

I don’t think they ever shrink, I put a used one on my car, so no issues, the fella I got it off when he changed his 4 years ago still struggles to get it flush with a thump or two

Wh1t3Kn1ght · **Posted:** Thu Sep 19, 2019 9:22 am

I fitted the OE sunroof seals to mine and made sure the edges were perfectly clean - I did it in the house so everything was warm and made sure I pushed the seal onto the sunroof firmly. Never had an issue with it getting stuck or sitting proud of the roof, fits perfectly.

Porsche Enthusiasts Club Forum

Sunroof Seal

Who is online