Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Seat Question
https://forums.tipec.net/viewtopic.php?f=25&t=24023		 Page 1 of 2
Author:  IanK [ Mon Jul 08, 2019 8:15 am ]
Post subject:  Seat Question
Hi all,

removed the front seats yesterday in readiness for having them retrimmed.

Are they missing a cover at the front to hide the motors etc - I noticed a couple of unsused brackets with U-nuts.

Thanks

Attachments:
Seatspg.jpg
Seatspg.jpg [ 255.52 KiB | Viewed 10059 times ]
Author:  Toby944 [ Mon Jul 08, 2019 8:39 am ]
Post subject:  Re: Seat Question
These are just like mine so unless we're both missing covers :D you're all good.
Author:  scam75 [ Mon Jul 08, 2019 9:38 am ]
Post subject:  Re: Seat Question
You are both missing covers!! Each one is held on with 2 screws and are prone to breaking.

Stuart
Author:  IanK [ Mon Jul 08, 2019 12:53 pm ]
Post subject:  Re: Seat Question
Ah yes - found them on Rose Passion - "Seat Engine Cover" at EUR11 each.

May have to get some when my seats come back looking good as new.
Author:  Waylander [ Mon Jul 08, 2019 4:56 pm ]
Post subject:  Re: Seat Question
covers

88>91

928 521 760 05 01C £10:37 Including Vat from your local Porsche dealership

Up to 1986 928 521 760 02 Dropped without replacement,

1987 > 1988

928 521 760 04 01C £17.45 each Inc Vat
Author:  Toby944 [ Tue Jul 09, 2019 8:19 am ]
Post subject:  Re: Seat Question
scam75 wrote:
You are both missing covers!! Each one is held on with 2 screws and are prone to breaking.

Stuart


:lol:

Cheers
Author:  IanK [ Thu Jul 11, 2019 7:34 am ]
Post subject:  Re: Seat Question
Thanks for the PN Waylander.
Author:  IanK [ Tue Aug 27, 2019 8:26 am ]
Post subject:  Re: Seat Question
OK Guys,

I purchased 2 of the motor covers from OPC. They fit the passanger seat fine, but not the drivers seat.

The pass seat has manual back/forward and electric up/down.

The driver has full electric.

The motor drive cables on the drivers seat are too bulky for the cover to fit as you can see from this pic.

Is there another part number for this side?

Thanks

Attachments:
20190824_161442.jpg
20190824_161442.jpg [ 200.24 KiB | Viewed 9633 times ]
Author:  scam75 [ Tue Aug 27, 2019 9:43 am ]
Post subject:  Re: Seat Question
There must be, call OPC or the ever helpful Waylander will check. They must be comfort seats then although it's hard to tell from a front on picture. AFAIK 8 way adjustable was only an option on comfort seats and not sports seats (bigger bolsters).

If you like I will buy the spare one that doesn't fit as I could do with a new one for my driver side that has an eyelet issue. If it's easier return it to Porsche to save any faffing about as I'm in no desperate need or rush.

Stuart
Author:  Waylander [ Tue Aug 27, 2019 3:46 pm ]
Post subject:  Re: Seat Question
you don't say which part number you bought


the part numbers I see in PET2

928 521 760 05 01C 944 S2 Turbo All electric

928 521 760 03 01C 944, 944s, turbo/turbo s, sports seat

928 521 760 04 01C 944, 944s

928 521 760 02 01C 944s/turbos front seat
Author:  IanK [ Tue Aug 27, 2019 4:00 pm ]
Post subject:  Re: Seat Question
So the ones I ordered are 928 521 760 050 1C - which look correct by Waylanders decription (its an S2 with an all electric drivers seat).

BTW - they were only £8.64 + VAT

I notice that my build label includes 438 which I believe is ”COMFORT SEAT RIGHT ELECTRIC ADJUSTABLE”

Ive asked my OPC to figure it out and maybe they will exchange.
Author:  Waylander [ Tue Aug 27, 2019 4:47 pm ]
Post subject:  Re: Seat Question
all the prices i put are inc Vat, just makes it easier
Author:  Prophead [ Tue Aug 27, 2019 6:03 pm ]
Post subject:  Re: Seat Question
IanK wrote:
Hi all,

removed the front seats yesterday in readiness for having them retrimmed.

Are they missing a cover at the front to hide the motors etc - I noticed a couple of unsused brackets with U-nuts.

Thanks


Probably too late for this now - but for anyone else - these seats don't need re-trimmed, they can be restored / repaired at a fraction of the price (even colour changed) if thats what you were after. I know because it is what I do. Admittedly it'll never be quite as good as freshly trimmed new leather but very decent results can be had.
Author:  ExAudiSi [ Tue Aug 27, 2019 6:19 pm ]
Post subject:  Re: Seat Question
I have one of the larger covers in my garage I think.
I was missing one from the drivers side when I got the car 12 years ago and ordered a replacement which didn't fit.
I'll have a look and see if I can find it.
Author:  ExAudiSi [ Tue Aug 27, 2019 6:54 pm ]
Post subject:  Re: Seat Question
Found it!

The part number is 928 521 760 04 01C.
It is a different shape to the one on my 968 which only has electric height adjustment.

Looks like it might be the right one for your seat as it has the hole in which would line up with the hex socket, which I guess is the emergency winder to move the seat back and forth without power.

Attachments:
IMG_2536.jpg
IMG_2536.jpg [ 29.87 KiB | Viewed 9578 times ]
Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/