They are quite expensive....as usual...
I found them here in Malta for €80 for a full set, but they have the brand letters painted on the front
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Wheel nuts https://forums.tipec.net/viewtopic.php?f=25&t=23759 |
Page 1 of 1 |
| Author: | karozza [ Tue Jan 08, 2019 1:41 pm ] |
| Post subject: | Wheel nuts |
Anywhere for reasonable price wheel nuts for the S2? |
|
| Author: | Waylander [ Tue Jan 08, 2019 2:51 pm ] |
| Post subject: | Re: Wheel nuts |
Alloy or Steel? |
|
| Author: | karozza [ Tue Jan 08, 2019 2:53 pm ] |
| Post subject: | Re: Wheel nuts |
I would say they're anodized alloy. |
|
| Author: | Waylander [ Tue Jan 08, 2019 7:26 pm ] |
| Post subject: | Re: Wheel nuts |
ok there are a few options I have been looking for myself http://www.trsuk.co.uk/shop/dporsche.html was about the cheapest i could find |
|
| Author: | karozza [ Wed Jan 09, 2019 8:30 am ] |
| Post subject: | Re: Wheel nuts |
They are quite expensive....as usual... I found them here in Malta for €80 for a full set, but they have the brand letters painted on the front
|
|
| Author: | Waylander [ Wed Jan 09, 2019 5:09 pm ] |
| Post subject: | Re: Wheel nuts |
just place in your mind that genuine ones are 11 euros each, and be very careful buying cheap ones, they might not have the correct radius cut seats. |
|
| Author: | karozza [ Fri Mar 01, 2019 4:33 pm ] |
| Post subject: | Re: Wheel nuts |
Bought them from RosePassion at €66 + VAT + Postage |
|
| Author: | Endoman [ Fri Mar 01, 2019 9:18 pm ] |
| Post subject: | Re: Wheel nuts |
Got fed up with the rapid deterioration and cost. I now use a set of steel ones from Jasmin and dipped them in a solution which blacks them and stops rusting. It only takes some gorilla with an air gun to ruin the originals. https://www.frost.co.uk/extra-blue-blac ... gKFKPD_BwE |
|
| Author: | karozza [ Sat Mar 02, 2019 10:50 am ] |
| Post subject: | Re: Wheel nuts |
Endoman wrote: Got fed up with the rapid deterioration and cost. I now use a set of steel ones from Jasmin and dipped them in a solution which blacks them and stops rusting. It only takes some gorilla with an air gun to ruin the originals. https://www.frost.co.uk/extra-blue-blac ... gKFKPD_BwE That actually sounds like a good idea! I think the anodized alloy nuts even get marked with a good twist of a socket, even by hand  The only real benefit I think is they are very light; if that is any real advantage. I only bought new ones to compliment having the D90s Powder Coated. As my original wheel nuts have gone well past their prime with use over time. |
|
| Author: | Wh1t3Kn1ght [ Wed May 22, 2019 8:08 pm ] |
| Post subject: | Re: Wheel nuts |
Holy thread resurrection  In the market for a replacement set of wheel nuts and not wanting to pay £175 for a genuine set of 20 from Porsche. I've found the following on the bay of gems -  £59.99 from Alloy Wheel Solutions - https://www.ebay.co.uk/itm/Set-of-20-x- ... 2273216782  EDIT: Just noticed are these ones no good as they are 60 degree taper and not the correct radius cut? £29.99 from Alloy Wheel Solutions (with 4 locking nuts) - https://www.ebay.co.uk/itm/Set-of-20-x- ... 2276828989 Just wondering if anyone has ordered the cheaper style nuts that have the donut ring on the end? Considered getting normal steel lug nuts as well -  EDIT: These are also 60 degree taper... £15.49! - https://www.ebay.co.uk/itm/20-x-M14-x-1 ... 2263946292 |
|
| Author: | karozza [ Thu May 23, 2019 7:37 am ] |
| Post subject: | Re: Wheel nuts |
Bought mine from Rosepassion at €66.80(No VAT due to company) for a set of 20, no locking nuts. Just over €12 for delivery together with side repeaters, some rubber sleeves etc. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|