| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Replacing gutter moulding seals https://forums.tipec.net/viewtopic.php?f=25&t=23739 |
Page 1 of 1 |
| Author: | brulynn [ Sun Dec 30, 2018 3:05 pm ] |
| Post subject: | Replacing gutter moulding seals |
Hi, the gutter moulding seals on my 944 need replacing, not a job I want to do myself for fear of bending the moulding. Can anyone recommend a company or individual who can do the work, preferably East Anglia based. |
|
| Author: | Waylander [ Sun Dec 30, 2018 3:48 pm ] |
| Post subject: | Re: Replacing gutter moulding seals |
They are actually quite easy to do, you need an old loyalty card and a bit of patience and a little mallet to whack the card with The easiest way is to pull the rock hard rubber bits out first if you can, and then release the clips with your loyalty card or plastic trim tool if you have one, done this job 3 times now, and the hardest part is getting the rubber to stay in the trim as you refit them, it’s a bit fiddly |
|
| Author: | hotblack944 [ Sun Dec 30, 2018 4:10 pm ] |
| Post subject: | Re: Replacing gutter moulding seals |
Yes, easy enough to do yourself - writeup here: http://forums.tipec.net/viewtopic.php?f=25&t=18953 |
|
| Author: | brulynn [ Sun Dec 30, 2018 4:37 pm ] |
| Post subject: | Re: Replacing gutter moulding seals |
Thanks for the info, looks like mine have been painted over. |
|
| Author: | Lawso [ Sun Dec 30, 2018 5:03 pm ] |
| Post subject: | Re: Replacing gutter moulding seals |
Are there gutter seals on early cars? Mines an 82 and I can’t see any seals at all. |
|
| Author: | JasonGibson [ Mon Dec 31, 2018 8:10 pm ] |
| Post subject: | Re: Replacing gutter moulding seals |
Early car may have the diferent type trim which has a piece of foam strip behind it |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|