| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Head lining - vinyl. https://forums.tipec.net/viewtopic.php?f=25&t=23332 |
Page 1 of 1 |
| Author: | Crank Case [ Tue Apr 24, 2018 9:31 pm ] |
| Post subject: | Head lining - vinyl. |
My head liner is a bit tatty. I wondered if anyone has cut a new one from new vinyl. I mean, it's not that big really as the sunroof and plastic take up most of it and vinyl is relatively inexpensive so I can have a few goes! |
|
| Author: | kongsodoken [ Tue Apr 24, 2018 10:18 pm ] |
| Post subject: | Re: Head lining - vinyl. |
I orrdered a new one from Southbound Only about £40 -£50 it was full marked with every fixing hole and it was easy to fit Vinyl was exact match to the original |
|
| Author: | Crank Case [ Tue Apr 24, 2018 10:23 pm ] |
| Post subject: | Re: Head lining - vinyl. |
kongsodoken wrote: I orrdered a new one from Southbound Only about £40 -£50 it was full marked with every fixing hole and it was easy to fit Vinyl was exact match to the original That's very useful, thanks. I also stumbled on this: http://944foot2thefloor.blogspot.co.uk/ ... e-944.html Did you use double sided tape? |
|
| Author: | kongsodoken [ Wed Apr 25, 2018 5:09 pm ] |
| Post subject: | Re: Head lining - vinyl. |
No double sided tape By the correct contact adhesive Not Evostick either from Southbound or email If you use the Southbound vinyl then the fixings are marked use these to scre the liner in place then apply contact to one area wait a few mins then attach, if you get wrinkles then hetat with hairdryer adhesive will release and vinyl with stretch It’s not that difficult |
|
| Author: | Crank Case [ Wed Apr 25, 2018 7:47 pm ] |
| Post subject: | Re: Head lining - vinyl. |
Okay, thank you. From your description, I take it, you attach the vinyl with the screws before applying any adhesive? What adhesive did you use? |
|
| Author: | kongsodoken [ Wed Apr 25, 2018 8:49 pm ] |
| Post subject: | Re: Head lining - vinyl. |
Use the screws to hold in place Then remove in one area glue when happy replace screw and move on Definitely need hairdryer in the corners Type high temp contact adhesive into ebay or google, Or Southbound will supply Can not find the link to the one I used but maybe in my build thread |
|
| Author: | Crank Case [ Wed Apr 25, 2018 10:33 pm ] |
| Post subject: | Re: Head lining - vinyl. |
kongsodoken wrote: Use the screws to hold in place Then remove in one area glue when happy replace screw and move on Definitely need hairdryer in the corners Type high temp contact adhesive into ebay or google, Or Southbound will supply Can not find the link to the one I used but maybe in my build thread Okay, that's clear. Thanks. Where's this 'build thread', link please? |
|
| Author: | Waylander [ Thu Apr 26, 2018 8:42 am ] |
| Post subject: | Re: Head lining - vinyl. |
viewtopic.php?f=25&t=11696 |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|