| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| ECU needs to come out ,looks easy ? https://forums.tipec.net/viewtopic.php?f=25&t=22820 |
Page 1 of 1 |
| Author: | jeffreyt [ Thu Jul 27, 2017 5:49 pm ] |
| Post subject: | ECU needs to come out ,looks easy ? |
Just realised the latest hole in the floor pan is right underneath the ECU . Had the plywood cover off and it looks as if the ECU and the cover plate its screwed onto come out quite easily,just a few screws. The wiring loom looks like it is clipped onto the top of the ECU which means I can unclip the ECU, take it out, and get the loom right off the floor. That way I will not fry the loom when I weld the floor. Not having messed with the ECU before I just want to make sure my reasoning is sound before I start taking the ECU out. If I have missed anything please tell me ,thanks. |
|
| Author: | Endoman [ Thu Jul 27, 2017 6:39 pm ] |
| Post subject: | Re: ECU needs to come out ,looks easy ? |
Sounds about right, o/c disconnect battery first. I changed my chip a while ago. |
|
| Author: | Prophead [ Thu Jul 27, 2017 8:01 pm ] |
| Post subject: | Re: ECU needs to come out ,looks easy ? |
its not the worst of jobs as long as the screws are not rusty. |
|
| Author: | AlpineTurbo [ Fri Jul 28, 2017 6:57 pm ] |
| Post subject: | Re: ECU needs to come out ,looks easy ? |
Yup, it's as easy as it looks! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|