Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
New hatch lock seal https://forums.tipec.net/viewtopic.php?f=25&t=22626 |
Page 1 of 1 |
Author: | hotblack944 [ Sat May 20, 2017 10:35 am ] |
Post subject: | New hatch lock seal |
My hatch lock seal was looking rather sad and split: So I installed a new one - much better! |
Author: | 944 Man [ Sat May 20, 2017 12:37 pm ] |
Post subject: | Re: New hatch lock seal |
£7:50 posted used off eBay or £1:50 new from your OPC? |
Author: | MichaelW944 [ Sat May 20, 2017 2:51 pm ] |
Post subject: | Re: New hatch lock seal |
The photos aren't coming up but how hard was it to fit? |
Author: | hotblack944 [ Sat May 20, 2017 2:55 pm ] |
Post subject: | Re: New hatch lock seal |
Frazerpart were having a Spring sale, so just over £4 new. Tacked it on a bigger parts order for the convenience. Shocking what you can pay on eBay. |
Author: | hotblack944 [ Sat May 20, 2017 2:59 pm ] |
Post subject: | Re: New hatch lock seal |
MichaelW944 wrote: The photos aren't coming up but how hard was it to fit? It's a doddle. The old one disintegrated when I tried to pull it out, so I carefully dug it out in chunks with a small screw driver. It left a sticky, rubbery mess all over the panel, which I cleaned up with tar remover, then prepped and waxed the paint. The new one just pushed into place. |
Author: | MichaelW944 [ Sat May 20, 2017 3:17 pm ] |
Post subject: | Re: New hatch lock seal |
There was me thinking it'd be hard to do. I paid £2.15 at OPC ![]() |
Author: | hotblack944 [ Sat May 20, 2017 3:19 pm ] |
Post subject: | Re: New hatch lock seal |
It would have cost me £2 in vpower to drive to my local Porsche Centre ![]() |
Author: | hotblack944 [ Sat May 20, 2017 3:21 pm ] |
Post subject: | Re: New hatch lock seal |
MichaelW944 wrote: The photos aren't coming up Is that any better? |
Author: | MichaelW944 [ Sat May 20, 2017 3:22 pm ] |
Post subject: | Re: New hatch lock seal |
hotblack944 wrote: It would have cost me £2 in vpower to drive to my local Porsche Centre ![]() Good point well made. I was going there anyway so worked out well for me. The photos work now, looks a lot better. |
Author: | hotblack944 [ Sat May 20, 2017 3:25 pm ] |
Post subject: | Re: New hatch lock seal |
Thanks. I'll get the hang of this internet malarkey one day... |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |