Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Best products to spruce up engine bay?
https://forums.tipec.net/viewtopic.php?f=25&t=21954		 Page 1 of 1
Author:  A.N. [ Sat Oct 15, 2016 3:49 pm ]
Post subject:  Best products to spruce up engine bay?
Evening chaps and chappess's,
Over the winter months I'm planning on getting the engine bay cleaned and spruced. What, in your opinions are the best products to use? There is a plethora of products out there so its hard to choose just one. I want to do everything from the aluminium through to the rubbers and plastics.
where feasible I will be replacing all screws nuts and bolts along the way and giving everything a nice coat of acf 50.
Author:  Timinchorley [ Sat Oct 15, 2016 9:13 pm ]
Post subject:  Re: Best products to spruce up engine bay?
A.N. wrote:
Evening chaps and chappess's,
Over the winter months I'm planning on getting the engine bay cleaned and spruced. What, in your opinions are the best products to use? There is a plethora of products out there so its hard to choose just one. I want to do everything from the aluminium through to the rubbers and plastics.
where feasible I will be replacing all screws nuts and bolts along the way and giving everything a nice coat of acf 50.


Try contacting Stu who runs the 968 forum at http://www.porsche968uk.co.uk. Sells all kinds of useful cosmetic finishing and maintenance products. Best go to http://www.K300.com, his business site. Tell him you have a 944 and that Tim sent you :)
Author:  flt505 [ Sun Oct 16, 2016 7:32 pm ]
Post subject:  Re: Best products to spruce up engine bay?
Image
Author:  flt505 [ Sun Oct 16, 2016 7:36 pm ]
Post subject:  Re: Best products to spruce up engine bay?
Image

Spraying the headlamp drive link is worth doing. The heater pipe also, but worth removing to do properly (and to check for rust corrosion at the inner end). Steam clean engine (or power clean) with a grease solvent, with a plastic bag over the diz cap. Replace all the water hose clips where possible, polish with household dust aerosol. Don't use the motor factor PTFE shiny stuff...

Dave
S2 CT
Author:  A.N. [ Mon Oct 17, 2016 2:30 pm ]
Post subject:  Re: Best products to spruce up engine bay?
flt505 wrote:
Image

Spraying the headlamp drive link is worth doing. The heater pipe also, but worth removing to do properly (and to check for rust corrosion at the inner end). Steam clean engine (or power clean) with a grease solvent, with a plastic bag over the diz cap. Replace all the water hose clips where possible, polish with household dust aerosol. Don't use the motor factor PTFE shiny stuff...

Dave
S2 CT



wow!!! that looks superb!
Author:  flt505 [ Mon Oct 17, 2016 7:34 pm ]
Post subject:  Re: Best products to spruce up engine bay?
Thanks A.N. - I've had a few concourse 'gongs' over the years with mine...

You may also have that original silverery cam cover? Worth doing as well and quite straight forward. Just unbolt it, strip with paint remover, then spray paint with a decent UHT/bake spray - colour of your choice. I used a USA product, 'crinkle black' finish, but you need your wife's/girlfriend's/mother's oven to bake in the crinkles!

Send pics when progress made!

Dave
CT
Author:  A.N. [ Tue Oct 18, 2016 9:54 am ]
Post subject:  Re: Best products to spruce up engine bay?
if mine ends up looking 1/2 as good as yours, then i'll be a happy bunny
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/