Porsche Enthusiasts Club Forum
https://forums.tipec.net/

MO30 Adjustable Shock Platform
https://forums.tipec.net/viewtopic.php?f=25&t=21760		 Page 1 of 1
Author:  sgl1966 [ Tue Aug 09, 2016 6:08 pm ]
Post subject:  MO30 Adjustable Shock Platform
Just to let anyone with mo30 shocks that the lower spring platform are back available . Looks like Porsche Germany have 150 available .
If you have tried adjusting the front springs when they haven't been moved for the last 25+ years you will realise how they weld themselves together as per a set I recently purchased . I was fortunate to get one to move but the other was solid , with these becoming available, I was able to cut the platform from the tube with the thread all good underneath . The threaded tube are still NLA , so make sure you don't damage these or cut to deep. Sent the shocks out to be rebuilt.
I replaced both of mine so have the good old one going spare for £30 plus postage if anyone needs one.

Attachments:
DSC00992 (Small).JPG
DSC00992 (Small).JPG [ 120.22 KiB | Viewed 4509 times ]
DSC00994 (Small).JPG
DSC00994 (Small).JPG [ 118.67 KiB | Viewed 4509 times ]
Author:  pauly [ Tue Aug 09, 2016 8:31 pm ]
Post subject:  Re: MO30 Adjustable Shock Platform
Ground Control in the US also make a conversion kit to fit standard struts.
Author:  sgl1966 [ Wed Sep 28, 2016 10:49 am ]
Post subject:  Re: MO30 Adjustable Shock Platform
Further to my first post , I have just received my rebuilt shocks back from Ian at IGRacing , his address is on koni uk website . Cost was very reasonable for all four to be stripped down, seals replaced and tested on his dyno. I did not ask and had these rebuilt to standered ,but I am sure he could revalve these to your requirements.
Look forward to getting these on the car and seeing how bad they were previously.
Author:  Hallsy [ Mon Oct 03, 2016 10:41 am ]
Post subject:  Re: MO30 Adjustable Shock Platform
Sgl1966 - have you had chance to try your rebuilt struts out yet?

I noticed this weekend that one of my M030 struts has gone soft and also both of the top adjusters are seized. I did actually contact a few of the Koni recommended repairers a couple of years ago, but I never had any response!

I'll contact IG to see if they can help me out this time around :)

Do they offer a shotblast & powder coat service as well as the internal refurb?
Author:  sgl1966 [ Mon Oct 03, 2016 11:56 am ]
Post subject:  Re: MO30 Adjustable Shock Platform
Hi , not managed to get them on the car yet , but you can tell there is substantial difference even with compressing by hand and they are so easy to adjust now.
Ian offers full paint/powder coat service if required although I had mine blasted before I sent them to him and have had them painted elsewhere with the correct RAL paint code he supplied .
Simon
Author:  Hallsy [ Mon Oct 03, 2016 12:07 pm ]
Post subject:  Re: MO30 Adjustable Shock Platform
Sounds good Simon, I'll get in touch with Ian for a quote.
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/