Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Engine Mounts https://forums.tipec.net/viewtopic.php?f=25&t=20984 |
Page 1 of 1 |
Author: | KennyP [ Thu Feb 18, 2016 9:06 am ] |
Post subject: | Engine Mounts |
Considering changing these as I don't think they have ever been done on my S2. I have noticed Frazerpart do new ones for a sensible cost. Max has been good to deal with in the past but I was wondering if anyone had any experience of them or a better alternative? The car is road use only so I don't want anymore NVH introduced. Thanks KennyP |
Author: | Prophead [ Thu Feb 18, 2016 11:48 am ] |
Post subject: | Re: Engine Mounts |
I have fitted the mounts from Frazerpart to my Lux, seem to be v good quality and very close in design to genuine parts at fraction of the cost. |
Author: | KennyP [ Thu Feb 18, 2016 12:23 pm ] |
Post subject: | Re: Engine Mounts |
Thanks Prophead, that's just what I wanted to read! I think I shall get them ordered. Cheers KennyP |
Author: | Richair [ Thu Feb 18, 2016 4:30 pm ] |
Post subject: | Re: Engine Mounts |
This has been covered loads in the past on here: cheaper ones are voided rubber, OEM ones are oil-filled. The cheaper ones are less-refined at removing vibration so you'll notice a bit more shake and noise at idle but that's probably about it. Have a search as there's loads of info across the forums on this. |
Author: | scam75 [ Thu Feb 18, 2016 6:52 pm ] |
Post subject: | Re: Engine Mounts |
The meyle ones Max sells are hydraulic as are the OEM ones. The rest are either solid or hollow rubber. You'll be fine with the hydraulic meyle mount. Stuart |
Author: | KennyP [ Thu Feb 18, 2016 7:03 pm ] |
Post subject: | Re: Engine Mounts |
Thanks for all the feedback. I had done a wee search but couldn't find the ones Max offers and his ad did state hydraulic. I have since ordered them and will post up any findings once fitted which could be a while looking at our weather forecast,,.... KennyP |
Author: | Prophead [ Thu Feb 18, 2016 7:55 pm ] |
Post subject: | Re: Engine Mounts |
The Frazerpart ones are oil filled hydraulic ones, like i said very similar to originals. |
Author: | Hallsy [ Sat Mar 12, 2016 6:55 am ] |
Post subject: | Re: Engine Mounts |
Just a heads up to anyone looking at the Meyle mount, and this may already be common knowledge, the Meyle mounts sold by Euro Car Parts and Frazer Parts are both the same part number - 414 375 0001 The only difference is that they are £52.99 from ECP, or £36 from Frazer - shame I bought mine from ECP ![]() |
Author: | MichaelW944 [ Sat Mar 12, 2016 12:51 pm ] |
Post subject: | Re: Engine Mounts |
Just ordered some from Frazer. Hope they improve the vibration in the cabin as you guys have found. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |