944-Scott wrote:
What spoiler do you have?
Rubber one, please excuse me for not knowing why that's relevant.
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| trouble fitting rear wiper motor cover https://forums.tipec.net/viewtopic.php?f=25&t=20957 |
Page 1 of 1 |
| Author: | MichaelW944 [ Thu Feb 11, 2016 10:16 pm ] |
| Post subject: | trouble fitting rear wiper motor cover |
I have replaced my rear wiper motor cover as the original has a hole in it. The one I have has 2 cut outs at the rear of it to allow space to push it flush to the plate without the screws getting in the way. The replacement does not have this, even though it shares the same part number. Could anyone shed some light on why they look different and if someone has cut the original, how I am meant to fit the new one as I cannot bend the centre of the rear enough to clip it on the single clip once the 2 others have been clipped in. Cheers. |
|
| Author: | MichaelW944 [ Thu Feb 11, 2016 10:28 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
This is the cover I have but my motor housing doesn't have those 'pins' coming from it. It has huge bolts. http://www.ebay.com/itm/PORSCHE-944-Tur ... PW&vxp=mtr This is the type I have with the cover I was expecting to receive: http://www.ebay.com/itm/Porsche-944-198 ... kh&vxp=mtr Notice the part number is identical for both. |
|
| Author: | 944-Scott [ Thu Feb 11, 2016 10:40 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
Not sure why they have the same part number but as per the adverts the first one is for an early car and the second is for the later models. |
|
| Author: | MichaelW944 [ Thu Feb 11, 2016 10:47 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
944-Scott wrote: Not sure why they have the same part number but as per the adverts the first one is for an early car and the second is for the later models. Thanks for response. I queried it with the OPC and was told they have supplied it correctly as it's the only one available for my vehicle. Of course if it has the same part code then it's not exactly easy to confirm. |
|
| Author: | MichaelW944 [ Thu Feb 11, 2016 11:24 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
This situation is ridiculous and must happen on other parts as well, Porsche in their infinite wisdom have changed the design and then not changed the part number. I have an 89 2.7 which anyone would think would be the same as the 88 2.7, obviously not as it uses the parts from the 89 S2 for the rear wiper motor plate and cover. |
|
| Author: | 944-Scott [ Thu Feb 11, 2016 11:26 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
What spoiler do you have? |
|
| Author: | MichaelW944 [ Thu Feb 11, 2016 11:33 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
944-Scott wrote: What spoiler do you have? Rubber one, please excuse me for not knowing why that's relevant.
|
|
| Author: | ALZ1933 [ Fri Feb 12, 2016 8:23 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
Bridge spoiler cars have a different sized hole in the screen for the later style wiper. I think that was the reason for the question. |
|
| Author: | 944-Scott [ Sat Feb 13, 2016 1:10 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
ALZ1933 wrote: Bridge spoiler cars have a different sized hole in the screen for the later style wiper. I think that was the reason for the question. That's very true. http://www.ebay.co.uk/itm/PORSCHE-944-R ... Swv-NWWFLH |
|
| Author: | MichaelW944 [ Sat Feb 13, 2016 1:38 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
That's the one I've been supplied but the one I need has cut outs on both sides to accommodate the large bolts. |
|
| Author: | 944-Scott [ Sat Feb 13, 2016 4:34 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
This one ? http://www.ebay.co.uk/itm/PORSCHE-944-R ... Swv-NWWFLH http://www.ebay.co.uk/itm/PORSCHE-944-R ... SwPhdU~rY4 |
|
| Author: | MichaelW944 [ Sat Feb 13, 2016 4:59 pm ] |
| Post subject: | Re: trouble fitting rear wiper motor cover |
944-Scott wrote: This one ? http://www.ebay.co.uk/itm/PORSCHE-944-R ... Swv-NWWFLH http://www.ebay.co.uk/itm/PORSCHE-944-REAR-WIPER-MOTOR-COVER-477-955-737-A-/121591973348?hash=item1c4f7245e4:g:XzoAAOSwPhdU~rY4 That bottom one is the one I needed. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|