| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| steering "clunk" https://forums.tipec.net/viewtopic.php?f=25&t=20789 |
Page 1 of 1 |
| Author: | alexsmith [ Sun Jan 03, 2016 2:15 pm ] |
| Post subject: | steering "clunk" |
I guess jmg will know this because they do steering parts but I need to find the problem first.. the steering kind of misses or "clunks" at extreme of lock, like round a roundabout. It "feels" like its near the steering wheel rather than nearer the wheels. It almost feels like a "gap" . nothing happens on a drive though or in normal driving just when I turn at a t juncion or parking. I'm wondering shaft (like JMG sell refurb) Or the needle bearing by the steering wheel? Any tips to help me track down the likely culprit? Thanks Alex |
|
| Author: | cococola [ Sun Jan 03, 2016 5:32 pm ] |
| Post subject: | Re: steering "clunk" |
steering shaft linkage? |
|
| Author: | Greggers [ Sun Jan 03, 2016 11:06 pm ] |
| Post subject: | Re: steering "clunk" |
I wonder if it's one of the steering arm bushes that might be worn, or even the ball joint that might be lifting at full lock then dropping again as you come off lock... |
|
| Author: | alexsmith [ Tue Jan 05, 2016 9:35 am ] |
| Post subject: | Re: steering "clunk" |
Greggers wrote: I wonder if it's one of the steering arm bushes that might be worn, or even the ball joint that might be lifting at full lock then dropping again as you come off lock... thanks both. above sounds likely but it kindof feels near the steering wheel end. investigation needed. ! alex |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|