it's hard to find but it is there, same sort of connector that's on the seats 2 of them IiRCTop left corner on passenger side top right on drivers side
I had the same problem finding them
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| How do I get these doors off! https://forums.tipec.net/viewtopic.php?f=25&t=20752 |
Page 1 of 1 |
| Author: | flux3d [ Wed Dec 23, 2015 8:49 pm ] |
| Post subject: | How do I get these doors off! |
Help, in order to get the sills finished I need to take the blooming doors off, but for the life of me I can't find where the wiring loom connects. Tracing it back it seems to disappear behind the dash. No connector in sight. Surely I don't have to take all the connectors out of the door to get it out. That would be a nightmare! Any help gratefully received, then after the turkey I can get the job all done (or maybe before if I can get out to the garage). |
|
| Author: | white944 [ Wed Dec 23, 2015 9:35 pm ] |
| Post subject: | Re: How do I get these doors off! |
It's there, keep looking. |
|
| Author: | kongsodoken [ Wed Dec 23, 2015 10:39 pm ] |
| Post subject: | Re: How do I get these doors off! |
| it's hard to find but it is there, same sort of connector that's on the seats 2 of them IiRC Top left corner on passenger side top right on drivers side I had the same problem finding them
|
|
| Author: | white944 [ Wed Dec 23, 2015 10:56 pm ] |
| Post subject: | Re: How do I get these doors off! |
I stripped the entire harness out of the drivers door, took it off then found the connector 
|
|
| Author: | flux3d [ Thu Dec 24, 2015 8:44 am ] |
| Post subject: | Re: How do I get these doors off! |
Thanks guys I'll keep looking.  the cable seems to run behind some insulation foam with a plastic covering which also seems to be breaking down. I knew it must have a connector somewhere. These cars are too well made to not have something.
|
|
| Author: | JasonGibson [ Thu Dec 24, 2015 8:47 am ] |
| Post subject: | Re: How do I get these doors off! |
Take the mirror apart, there is a connector in there but You need to push the pins out. Make a diagram of wiring and use a proper tool for pushing the pins |
|
| Author: | kongsodoken [ Thu Dec 24, 2015 9:03 pm ] |
| Post subject: | Re: How do I get these doors off! |
flux3d wrote: Thanks guys I'll keep looking. the cable seems to run behind some insulation foam with a plastic covering which also seems to be breaking down. I knew it must have a connector somewhere. These cars are too well made to not have something.Just a tip Don't follow the wire, look for the connector |
|
| Author: | Corranga [ Mon Jan 04, 2016 9:19 pm ] |
| Post subject: | Re: How do I get these doors off! |
hmm, I have 2 doors to swap on mine, replacements are in the right colour, but the wiring looms were cut, not looking forward to this... 
|
|
| Author: | kongsodoken [ Mon Jan 04, 2016 10:54 pm ] |
| Post subject: | Re: How do I get these doors off! |
Found my connectors at the weekend On the bulkhead just behind the fuse box  It's not a difficult job
|
|
| Author: | white944 [ Tue Jan 05, 2016 6:53 pm ] |
| Post subject: | Re: How do I get these doors off! |
Found this useful video... https://www.google.co.uk/url?sa=t&rct=j ... 2OedLvxEMg |
|
| Author: | flux3d [ Wed Jan 06, 2016 8:21 pm ] |
| Post subject: | Re: How do I get these doors off! |
I found them inbox the end. Right up in the corner. One door is of already and the other will come off when I do that side soon. Not too bad after all. |
|
| Author: | flux3d [ Wed Jan 06, 2016 8:23 pm ] |
| Post subject: | Re: How do I get these doors off! |
Lol, very useful video, if a little more destructive than I'd have liked.
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|