I separated the parts with a vice and a bit of force - being careful not to mark the shiny parts! I then replaced the inner seal (available from Porsche), lubricated and applied more force to get it back together.
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Oil pressure relief valve https://forums.tipec.net/viewtopic.php?f=25&t=20400 |
Page 1 of 1 |
| Author: | DaveP [ Sat Sep 12, 2015 8:47 pm ] |
| Post subject: | Oil pressure relief valve |
I want to replace the seals on my OPRV (late type). The external one is a no brainer, but how do I take the valve apart to replace the inner seal??? |
|
| Author: | Waylander [ Sun Sep 13, 2015 12:06 am ] |
| Post subject: | Re: Oil pressure relief valve |
Don't think you can |
|
| Author: | hotblack944 [ Sun Sep 13, 2015 7:08 am ] |
| Post subject: | Re: Oil pressure relief valve |
I separated the parts with a vice and a bit of force - being careful not to mark the shiny parts! I then replaced the inner seal (available from Porsche), lubricated and applied more force to get it back together.
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|