Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Bit of Info about 968 MAF sensors https://forums.tipec.net/viewtopic.php?f=25&t=20302 |
Page 1 of 1 |
Author: | Waylander [ Fri Aug 21, 2015 7:01 pm ] |
Post subject: | Bit of Info about 968 MAF sensors |
Ok after a small ruckus on another forum I have been researching MAF sensors from Bosch our cars use a Bosch MAF 0 280 213 017 this is a very expensive part and is prone to contamination especially from over oiled K&N filters during my efforts to find an alternative I found the following information. ![]() ![]() so with a little more research and asking a few questions in other places the numbers starting from 0 280 213 007 all measure the same amount of Air Mass (KG/Hour) the only difference is mountings and connection type so a replacement for ours would possibly be 0 280 213 007 off a Volvo 940 brand new at £63.00 instead of 0 280 213 017 at £830.00! this was all kicked off by a guy repairing his with a bit of copper wire when he broke his cleaning it, which worked by the way, he reports much better throttle response with a new wire??? Bosch Short Code for this part is HLM-2-18 this is a list of all other MAF with the same short code BOSCH 0 280 212 016 Air Mass Sensor BOSCH 0 280 212 019 Air Mass Sensor BOSCH 0 280 212 024 Air Mass Sensor BOSCH 0 280 213 012 Air Mass Sensor this looks a good candidate BOSCH 0 280 213 017 Air Mass Sensor BOSCH 0 280 213 021 Air Mass Sensor BOSCH 0 280 213 025 Air Mass Sensor http://www.ebay.co.uk/itm/MASS-AIR-FLOW ... 1053605088 just found this http://rennlist.com/forums/968-forum/62 ... ensor.html so my research was correct |
Author: | Pink piggy [ Fri Aug 21, 2015 11:23 pm ] |
Post subject: | Re: Bit of Info about 968 MAF sensors |
Good man! I dont like the words "mark up" as it sounds too much like make up a price. |
Author: | white944 [ Sat Aug 22, 2015 6:50 am ] |
Post subject: | Re: Bit of Info about 968 MAF sensors |
Brilliant. Love an alternative fix. |
Author: | Greggers [ Sat Aug 22, 2015 2:23 pm ] |
Post subject: | Re: Bit of Info about 968 MAF sensors |
Wish someone brighter than me could work out how to plumb one into a 944 intake ... |
Author: | robmal [ Sat Aug 22, 2015 6:14 pm ] |
Post subject: | Re: Bit of Info about 968 MAF sensors |
Greggers wrote: Wish someone brighter than me could work out how to plumb one into a 944 intake ... + me there... but I suspect that upgrading the ECU with an AugTronic board would be the way to do it http://www.augmentautomotive.co.uk/augtronic-porsche-944-ecu/ |
Author: | 944s2Fla [ Wed Sep 02, 2015 11:02 am ] |
Post subject: | Re: Bit of Info about 968 MAF sensors |
I have a real working one if anyone is interested in a swap or purchase.Ciaran |
Author: | Waylander [ Wed Sep 02, 2015 3:15 pm ] |
Post subject: | Re: Bit of Info about 968 MAF sensors |
real working one what? |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |