Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
s2 convertible door window slot seal (outside)? https://forums.tipec.net/viewtopic.php?f=25&t=20269 |
Page 1 of 1 |
Author: | HUBBA.HUBBA [ Wed Aug 12, 2015 11:51 am ] |
Post subject: | s2 convertible door window slot seal (outside)? |
Are they the same as the coupe seals? As there is the small fixed glass bit on the convertible. Looking at mine on one side it moulds round the bar holding the window and on the other side a chunk has been cut out to go round the bar. I would take a pic but my camera or phone won't go low enough on the pixels. |
Author: | Waylander [ Wed Aug 12, 2015 12:36 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
get a photobucket account, install the app on your phone. snap away then upload your photos to photobucket, then copy and just place the links from photobucket in your posts on here |
Author: | JasonGibson [ Wed Aug 12, 2015 1:09 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
Is this what you need ? http://www.rosepassion.com/en/cat/porsc ... eft/P32898 new Part number 94153757220 Cabrio only |
Author: | HUBBA.HUBBA [ Wed Aug 12, 2015 3:45 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
jasongibson wrote: Is this what you need ? http://www.rosepassion.com/en/cat/porsc ... eft/P32898 new Part number 94153757220 Cabrio only Looks like it on the diagram (in red), but not the pic (it says inner and looks like its just cut off at the ends as opposed to slanted/finished) |
Author: | HUBBA.HUBBA [ Wed Aug 12, 2015 3:50 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
Also, do they just clip on to the door or are there any extra clips required. Would like to know before I take it off as I've been told taking them off often involves a load of rusty, nastiness coming off with it. Fyi looking to change them as they are a bit lumpy and I need to address a couple of rust spots bubbling through at the top of each door. |
Author: | Waylander [ Wed Aug 12, 2015 6:38 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
the two outer windows scrapper seals are 941 537 093 10 LH NLA 941 537 094 10 RH NLA Inner window scrapper seals 941 537 572 10 or if the part number has changed 941 537 572 20 Both the same £30 each, |
Author: | HUBBA.HUBBA [ Thu Aug 13, 2015 6:30 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
Waylander wrote: the two outer windows scrapper seals are 941 537 093 10 LH NLA 941 537 094 10 RH NLA Inner window scrapper seals 941 537 572 10 or if the part number has changed 941 537 572 20 Both the same £30 each, Ok cheers |
Author: | HUBBA.HUBBA [ Thu Sep 10, 2015 4:22 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
If anyone ever comes across a set of cab external slot seals 941 537 093 10 LH NLA and 941 537 094 10 RH NLA, please, please let me know. Cheers |
Author: | Waylander [ Thu Sep 10, 2015 8:19 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
Try 944 reanimation in the USA find the on eBay.com |
Author: | HUBBA.HUBBA [ Tue Sep 15, 2015 6:55 pm ] |
Post subject: | Re: s2 convertible door window slot seal (outside)? |
Waylander wrote: Try 944 reanimation in the USA find the on eBay.com Cheers. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |