| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| power steering rack leak from banjo connection https://forums.tipec.net/viewtopic.php?f=25&t=20223 |
Page 1 of 1 |
| Author: | Prophead [ Sun Aug 02, 2015 1:50 pm ] |
| Post subject: | power steering rack leak from banjo connection |
Have a reasonable leak i think from the banjo connection that goes to the cooler (connection on top of the rack). It was already quite tight but have pinched it up some more, however it stills seems to be leaking, although not as much. 1. What is this risk of over tightening these bolts? 2. Are there seals on these connections? If so, can they be replaced individually? Cheers. |
|
| Author: | Matey [ Sun Aug 02, 2015 2:55 pm ] |
| Post subject: | Re: power steering rack leak from banjo connection |
There's copper crush washers in there, pennys to buy. |
|
| Author: | JasonGibson [ Sun Aug 02, 2015 2:55 pm ] |
| Post subject: | Re: power steering rack leak from banjo connection |
All parts are listed in the PET If for some reason you don't already have a copy, you can download from here http://www.porsche.com/usa/accessoriesa ... catalogue/ |
|
| Author: | Prophead [ Sun Aug 02, 2015 3:46 pm ] |
| Post subject: | Re: power steering rack leak from banjo connection |
Thanks guys |
|
| Author: | tr7v8 [ Sun Aug 02, 2015 7:39 pm ] |
| Post subject: | Re: power steering rack leak from banjo connection |
The other way is to strip the copper washers off & re-anneal them with a blowlamp. Polish off on some wet n dry after. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|