| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| oil cooler seal kit https://forums.tipec.net/viewtopic.php?f=25&t=20216 |
Page 1 of 1 |
| Author: | rapidstu [ Fri Jul 31, 2015 6:20 pm ] |
| Post subject: | oil cooler seal kit |
i have a massive leak from my 944 cab, looks to be coming from the seals where the oil cooler pipes clamp onto the oil cooler housing, i have a kit of seals for the later 944 and 968 but these two seals are not in it, BUT there are 2 ally washers that look like they will go over the ends of the pipe and compress when the pipes are refitted and clamped up. is this correct ?? or do i need to try and source the seals seperately. thanks stuart |
|
| Author: | white944 [ Fri Jul 31, 2015 6:40 pm ] |
| Post subject: | Re: oil cooler seal kit |
I think they're shims for setting the housing up on an early car with internal cooler. |
|
| Author: | Waylander [ Fri Jul 31, 2015 10:50 pm ] |
| Post subject: | Re: oil cooler seal kit |
There are 4 O Rings on the oil cooler pipes and no shims shown in PET I replaced mine when I had the oil filter housing off, as that was puking oil all over the place |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|