Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Recomended Welders for Sill in Nottingham
https://forums.tipec.net/viewtopic.php?f=25&t=20201		 Page 1 of 1
Author:  barbeast [ Tue Jul 28, 2015 4:49 pm ]
Post subject:  Recomended Welders for Sill in Nottingham
I've been having a poke around the outer sill of my 944 S2, and managed to put a hole in it (doh!). So before the whole lot goes, can anyone recommend any welders/restorers in the Nottingham area? I'm guessing it's likely to involve anywhere between a patch repair and complete sill replacement.
Author:  951Torqing [ Tue Jul 28, 2015 4:57 pm ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
Had the bodywork on mine sorted last year, damn good job by Rust to riches at Hemswell (reasonable as well!) but probably be too far for you, Link to my post asking for recommendations last year
viewtopic.php?f=25&t=17924&p=129777&hilit=bodyshop+recommendations#p127274

For the results seep page 98 of this link :-
viewtopic.php?f=25&t=13151&start=1455#p135330
HTH
Clive
Author:  barbeast [ Wed Jul 29, 2015 5:09 pm ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
951Torqing wrote:
Had the bodywork on mine sorted last year, damn good job by Rust to riches at Hemswell (reasonable as well!) but probably be too far for you, Link to my post asking for recommendations last year
viewtopic.php?f=25&t=17924&p=129777&hilit=bodyshop+recommendations#p127274

For the results seep page 98 of this link :-
viewtopic.php?f=25&t=13151&start=1455#p135330
HTH
Clive


Hi thanks, yeah that is too far away from me, need someone closer to Nottingham!
Author:  951Torqing [ Wed Jul 29, 2015 5:43 pm ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
On 2nd thoughts it might be worth a phone call to :-
PH Sportscars (Shardlow)
or
Zentrum Porsche www.zentrum.co.uk/ Nottingham

to see if they can recommend anyone.

Have used both some years ago for servicing bit not bodywork.

Clive
Author:  edh [ Tue Aug 04, 2015 10:47 am ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
try Cavendish Classics - he was nextdoor to PH sportscars & is now in Long Eaton. 0115 972 8209
Author:  944 Man [ Tue Aug 04, 2015 5:21 pm ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
Is that Kev?
Author:  edh [ Thu Aug 06, 2015 11:12 am ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
944 Man wrote:
Is that Kev?


no

JD
Author:  barbeast [ Fri Jan 01, 2016 11:47 am ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
Sorry to dig up this old post, but to update everyone I went with JD at Cavendish Classics in Long Eaton. He did a good job of cutting out the rusty section, welding in a replacement, then painting. Cost was £200. He told me he has another in recently that required alot more work, sills, arches, floor.

Anyway he did a good job, if you are in the Nottinghamshire area I would check him out for welding work.
Author:  andy97 [ Sat Jan 02, 2016 5:26 pm ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
Another shout out in favour of Jay at Cavendish Classics, has done work on my 924S race car, inc sills, and does a good job and is very reasonable rates.

He also did a fair amount of work on my Audu Ur Quattro, and I wouldn't entrust that to many people!
Author:  edh [ Sun Jan 03, 2016 2:54 pm ]
Post subject:  Re: Recomended Welders for Sill in Nottingham
Excellent - always good to hear a happy ending :)
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/