Porsche Enthusiasts Club Forum
https://forums.tipec.net/

924 clutch change
https://forums.tipec.net/viewtopic.php?f=25&t=19847		 Page 1 of 1
Author:  sam [ Mon May 18, 2015 6:38 am ]
Post subject:  924 clutch change
Hi, I have a mate with a 924 who thinks his clutch has gone, he asked me what sort of job a clutch change was on a 924, and was it an engine out job? I had to admit that I have not the slightest idea about front engined Pcars mechanicals, but knew some folk that do........................................ :)
Author:  Carrera RSR [ Mon May 18, 2015 10:27 am ]
Post subject:  Re: 924 clutch change
Can be engine out leaving the bell housing/torque tube in the car OR gearbox out and pulling the torgue tube back so the bell housing comes off. Six and two threes which is harder or more time consuming. Depends if other work is required 'whilst in there' at either end which makes engine or gearbox out more sense. Circa a full day or so and £500 labour for a garage plus parts.
Author:  sam [ Mon May 18, 2015 10:45 am ]
Post subject:  Re: 924 clutch change
Carrera RSR wrote:
Can be engine out leaving the bell housing/torque tube in the car OR gearbox out and pulling the torgue tube back so the bell housing comes off. Six and two threes which is harder or more time consuming. Depends if other work is required 'whilst in there' at either end which makes engine or gearbox out more sense. Circa a full day or so and £500 labour for a garage plus parts.



Cheers Steve
Author:  AlpineTurbo [ Mon May 18, 2015 7:23 pm ]
Post subject:  Re: 924 clutch change
Pretty much what Steve said.

On my S2 I took the engine out but only because the damage to it was unviable to repair.
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/