| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| How do you remove the windscreen pillar plastic trim? https://forums.tipec.net/viewtopic.php?f=25&t=19764 |
Page 1 of 1 |
| Author: | LilMsPiggy [ Sun May 03, 2015 5:29 pm ] |
| Post subject: | How do you remove the windscreen pillar plastic trim? |
Changing the headlining on my 88 944s and need to remove the plastic windscreen pillar trim, removed three blanking plugs, middle and bottom one phillips screws but not in the top one. Help, what is holding the top one, no screw there but it won 't come off!  And I thought the hardest part would be removing the Quarter windows, that was straight forward.  Thanks Ian. |
|
| Author: | JasonGibson [ Sun May 03, 2015 6:02 pm ] |
| Post subject: | Re: How do you remove the windscreen pillar plastic trim? |
Very likely that there is a screw at the top. The trim has moved on top of it. Had The same on mine and screw was rusty |
|
| Author: | ALZ1933 [ Sun May 03, 2015 6:59 pm ] |
| Post subject: | Re: How do you remove the windscreen pillar plastic trim? |
Like wise, I has the same problem. Screws were rusty and were not in the centre of the holes where the caps had come from. Took a bit of feeling around with the screwdriver and a difficult peek with a torch. |
|
| Author: | LilMsPiggy [ Sun May 03, 2015 7:30 pm ] |
| Post subject: | Re: How do you remove the windscreen pillar plastic trim? |
Thanks, will have a closer look for the screw with a torch tomorrow. |
|
| Author: | LilMsPiggy [ Mon May 04, 2015 6:51 pm ] |
| Post subject: | Re: How do you remove the windscreen pillar plastic trim? |
Result, found the screw way off centre to the hole (not rusty though) in fact they could not be seen with a torch, same on both sides, anyway trims now off  Thanks again guys Ian. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|