| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Fuel rail test kit https://forums.tipec.net/viewtopic.php?f=25&t=19483 |
Page 1 of 1 |
| Author: | HUBBA.HUBBA [ Sun Mar 15, 2015 6:20 pm ] |
| Post subject: | Fuel rail test kit |
Looking to buy one of theses kits - http://www.amazon.co.uk/Petrol-diesel-p ... 1G0BHK6W2Q Can anyone recommend one, as I'm not sure whst size the port is. Also is the s2 fuel rail test port a schrader type? Cheers |
|
| Author: | Hallsy [ Mon Mar 16, 2015 7:41 am ] |
| Post subject: | Re: Fuel rail test kit |
The fuel rail has a gauge port with M12 x 1.5 thread, so your kit will need a female 12 x 1.5 adaptor. The cap has a ball bearing in it to seal the port, so take when removing the cap. If you take a look on Clarks garage there is a table showing the pressures you should be seeing. |
|
| Author: | HUBBA.HUBBA [ Mon Mar 16, 2015 11:56 am ] |
| Post subject: | Re: Fuel rail test kit |
Hallsy wrote: The fuel rail has a gauge port with M12 x 1.5 thread, so your kit will need a female 12 x 1.5 adaptor. The cap has a ball bearing in it to seal the port, so take when removing the cap. If you take a look on Clarks garage there is a table showing the pressures you should be seeing. Cheers |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|