Porsche Enthusiasts Club Forum
https://forums.tipec.net/

996 Carrera 4 wheels on a 944 S2
https://forums.tipec.net/viewtopic.php?f=25&t=19223
Page 1 of 1

Author:  zedhex [ Mon Jan 26, 2015 9:44 pm ]
Post subject:  996 Carrera 4 wheels on a 944 S2

I just bought a set of 17" 996 Carrera 4 wheels, but when I try to fit them on my 944 S2, the fronts foul the centre bore. If I fit a spacer (I think about 8mm should be enough), they may fit, but then I would have to fit longer studs. After searching thru lots of forum posts I can find lots of people who have fitted 996 wheels on a 944, but none of them seem to mention anything about spacers. I am wondering if I have standard hubs - has anyone else had to fits front spacers to get 996 17" wheels on?

Author:  944 Man [ Mon Jan 26, 2015 9:47 pm ]
Post subject:  Re: 996 Carrera 4 wheels on a 944 turbo

7mm

Author:  944 Man [ Mon Jan 26, 2015 9:48 pm ]
Post subject:  Re: 996 Carrera 4 wheels on a 944 S2

I have C2 wheels btw.

Author:  zedhex [ Tue Feb 03, 2015 5:27 pm ]
Post subject:  Re: 996 Carrera 4 wheels on a 944 S2 Don't fit!!!

I just tried this. I bought a set of 7mm spacers and tried to fit my 996 wheels, they still foul the centre bore. It is not by much - I can just get a 0.08mm feeler gauge in the gap. After calling around, everyone is telling me they ought to fit. I have tried thoroughly cleaning the hub and wheel faces, and removing the centre caps, but the bore still fouls. I am stumped.

One possibility may be that I don't have stock hubs. The previous owner swapped most of the suspension over from a 1991 turbo Cabriolet, so I wonder if the hubs are different? Has anyone out there seen this before?

Author:  andywatson [ Tue Feb 03, 2015 5:32 pm ]
Post subject:  Re: 996 Carrera 4 wheels on a 944 S2

Do you mean they catch on the wheel bearing cap? I had that with the Sport Design wheels I used to have, pop the cap off they will fit fine.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/