999 511 199 40 clamp Including nut
999 591 975 40 the rubber bit
Any hydraulic supplier will have the O ring if you know the size
Merry Christmas
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| few small bits. kongston will know no doubt https://forums.tipec.net/viewtopic.php?f=25&t=19070 |
Page 1 of 1 |
| Author: | t3rra [ Sun Dec 28, 2014 1:32 am ] |
| Post subject: | few small bits. kongston will know no doubt |
Installed some braided fuel lines today. Noticed the Oring on the fpr has a little nip in it and was leaking, turned it around stop the leak but will replace. Where can I get bosch o ring for fpr that don't charge 3 time item in postage. Also fuel line clips. Got the rubber with metal case and plastic nut. Need a new plastic nut, have these items been replace with one? That requires a slight tap with a hammer to separate the nut/pin from the clamp/clip ( part number? ) opc? |
|
| Author: | kongsodoken [ Sun Dec 28, 2014 1:06 pm ] |
| Post subject: | Re: few small bits. kongston will know no doubt |
| 999 511 199 40 clamp Including nut 999 591 975 40 the rubber bit Any hydraulic supplier will have the O ring if you know the size Merry Christmas
|
|
| Author: | t3rra [ Mon Dec 29, 2014 3:14 pm ] |
| Post subject: | Re: few small bits. kongston will know no doubt |
Ordered. Didn't catch the price ordered a new brake res and clutch £120! Had an o ring on another fpr |
|
| Author: | kongsodoken [ Mon Dec 29, 2014 6:58 pm ] |
| Post subject: | Re: few small bits. kongston will know no doubt |
must be Christmas 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|